fix couple issues with usb firmware

efm8/inc/app.h

@@ -16,6 +16,19 @@ void spi_transfer_complete();
 #define EFM32_RW_PIN	P1_B2
 #define MSG_RDY_INT_PIN	P1_B1
 
+#define INPUT_ENDPOINT		EP2OUT
+#define OUTPUT_ENDPOINT		EP3IN
+
+#define INPUT_ENDPOINT_NUM		0x83
+#define OUTPUT_ENDPOINT_NUM		0x02
+
+//#define INPUT_ENDPOINT		EP1OUT
+//#define OUTPUT_ENDPOINT		EP1IN
+//
+//#define INPUT_ENDPOINT_NUM		0x81
+//#define OUTPUT_ENDPOINT_NUM		0x01
+
+
 void delay(int ms);
 
 #endif /* INC_APP_H_ */

efm8/inc/descriptors.h

@@ -57,8 +57,9 @@ extern SI_SEGMENT_VARIABLE(initstruct, const USBD_Init_TypeDef, SI_SEG_CODE);
 #endif
 
 #endif // __SILICON_LABS_DESCRIPTORS_H
-
+#if 0
 // $[HID Report Descriptors]
-extern SI_SEGMENT_VARIABLE(ReportDescriptor0[34], const uint8_t, SI_SEG_CODE);
+extern SI_SEGMENT_VARIABLE(ReportDescriptor0[0], const uint8_t, SI_SEG_CODE);
 // [HID Report Descriptors]$
+#endif
 

efm8/src/callback.c

@@ -28,6 +28,7 @@
 #include <stdio.h>
 #include "printing.h"
 #include "descriptors.h"
+#include "app.h"
 
 #define UNUSED(expr) do { (void)(expr); } while (0)
 
@@ -63,22 +64,19 @@ USB_Status_TypeDef USBD_SetupCmdCb(
 		SI_VARIABLE_SEGMENT_POINTER(setup, USB_Setup_TypeDef, MEM_MODEL_SEG)) {
 
 	USB_Status_TypeDef retVal = USB_STATUS_REQ_UNHANDLED;
-//	USB_Status_TypeDef retVal = USB_STATUS_OK;
+
-//	cprints("USBD_SetupCmdCb\r\n");
 
 	if ((setup->bmRequestType.Type == USB_SETUP_TYPE_STANDARD)
 			&& (setup->bmRequestType.Direction == USB_SETUP_DIR_IN)
 			&& (setup->bmRequestType.Recipient == USB_SETUP_RECIPIENT_INTERFACE)) {
 		// A HID device must extend the standard GET_DESCRIPTOR command
 		// with support for HID descriptors.
-//		cprints("USB_SETUP_TYPE_STANDARD\r\n");
+
 		switch (setup->bRequest) {
 		case GET_DESCRIPTOR:
-//			cprints("GET_DESCRIPTOR\r\n");
 			if (setup->wIndex == 0)
 			{
 				if ((setup->wValue >> 8) == USB_HID_REPORT_DESCRIPTOR) {
-//					cprints("1\r\n");
 
 						USBD_Write(EP0, ReportDescriptor0,
 								EFM8_MIN(sizeof(ReportDescriptor0), setup->wLength),
@@ -86,7 +84,7 @@ USB_Status_TypeDef USBD_SetupCmdCb(
 						retVal = USB_STATUS_OK;
 
 				} else if ((setup->wValue >> 8) == USB_HID_DESCRIPTOR) {
-//						cprints("2\r\n");
+
 						USBD_Write(EP0, (&configDesc[18]),
 								EFM8_MIN(USB_HID_DESCSIZE, setup->wLength), false);
 						retVal = USB_STATUS_OK;
@@ -100,12 +98,10 @@ USB_Status_TypeDef USBD_SetupCmdCb(
 	           && (setup->bmRequestType.Recipient == USB_SETUP_RECIPIENT_INTERFACE)
 	           && (setup->wIndex == HID_INTERFACE_INDEX))
 	  {
-//		cprints("USB_SETUP_TYPE_CLASS\r\n");
 	    // Implement the necessary HID class specific commands.
 	    switch (setup->bRequest)
 	    {
 	      case USB_HID_SET_IDLE:
-//	    	  cprints("USB_HID_SET_IDLE\r\n");
 	        if (((setup->wValue & 0xFF) == 0)             // Report ID
 	            && (setup->wLength == 0)
 	            && (setup->bmRequestType.Direction != USB_SETUP_DIR_IN))
@@ -115,7 +111,6 @@ USB_Status_TypeDef USBD_SetupCmdCb(
 	        break;
 
 	      case USB_HID_GET_IDLE:
-//	    	  cprints("USB_HID_GET_IDLE\r\n");
 	        if ((setup->wValue == 0)                      // Report ID
 	            && (setup->wLength == 1)
 	            && (setup->bmRequestType.Direction == USB_SETUP_DIR_IN))
@@ -129,10 +124,6 @@ USB_Status_TypeDef USBD_SetupCmdCb(
 	    	  break;
 	    }
 	  }
-	else
-	{
-//		cprints("nothing\r\n");
-	}
 
 	return retVal;
 }
@@ -147,11 +138,11 @@ uint16_t USBD_XferCompleteCb(uint8_t epAddr, USB_Status_TypeDef status,
 	UNUSED(xferred);
 	UNUSED(remaining);
 
-	if (epAddr == EP2OUT)
+	if (epAddr == INPUT_ENDPOINT)
 	{
 		usb_transfer_complete();
 	}
-	else if (epAddr == EP3IN)
+	else if (epAddr == OUTPUT_ENDPOINT)
 	{
 		usb_writeback_complete();
 	}

efm8/src/descriptors.c

@@ -14,6 +14,7 @@
 #include <string.h>
 #include <efm8_usb.h>
 #include "descriptors.h"
+#include "app.h"
 
 #ifdef __cplusplus
 extern "C" {
@@ -107,7 +108,7 @@ SI_SEGMENT_VARIABLE(configDesc[],
 	//Endpoint 2 IN Descriptor
 	USB_ENDPOINT_DESCSIZE,// bLength
 	USB_ENDPOINT_DESCRIPTOR,// bDescriptorType
-	0x83,// bEndpointAddress
+	OUTPUT_ENDPOINT_NUM,// bEndpointAddress
 	USB_EPTYPE_INTR,// bAttrib
 	HID_PACKET_SIZE,// wMaxPacketSize (LSB)
 	0x00,// wMaxPacketSize (MSB)
@@ -116,7 +117,7 @@ SI_SEGMENT_VARIABLE(configDesc[],
 	//Endpoint 3 OUT Descriptor
 	USB_ENDPOINT_DESCSIZE,// bLength
 	USB_ENDPOINT_DESCRIPTOR,// bDescriptorType
-	0x02,// bEndpointAddress
+	INPUT_ENDPOINT_NUM,// bEndpointAddress
 	USB_EPTYPE_INTR,// bAttrib
 	HID_PACKET_SIZE,// wMaxPacketSize (LSB)
 	0x00,// wMaxPacketSize (MSB)
@@ -139,7 +140,7 @@ LANGID_STATIC_CONST_STRING_DESC( langDesc[], LANG_STRING );
 UTF16LE_PACKED_STATIC_CONST_STRING_DESC( mfrDesc[], MFR_STRING, MFR_SIZE);
 UTF16LE_PACKED_STATIC_CONST_STRING_DESC( prodDesc[], PROD_STRING, PROD_SIZE);
 UTF16LE_PACKED_STATIC_CONST_STRING_DESC( serDesc[], SER_STRING, SER_SIZE);
-UTF16LE_PACKED_STATIC_CONST_STRING_DESC( cfgDesc[], CFG_STRING, CFG_SIZE);
+//UTF16LE_PACKED_STATIC_CONST_STRING_DESC( cfgDesc[], CFG_STRING, CFG_SIZE);
 UTF16LE_PACKED_STATIC_CONST_STRING_DESC( int0Desc[], INT0_STRING, INT0_SIZE);
 
 
@@ -165,7 +166,7 @@ SI_SEGMENT_VARIABLE(initstruct,
 	deviceDesc,                                         // deviceDescriptor
 	configDesc,// configDescriptor
 	myUsbStringTable_USEnglish,// stringDescriptors
-	sizeof(myUsbStringTable_USEnglish) / sizeof(void *)// numberOfStrings
+	5// numberOfStrings
 };
 
 #ifdef __cplusplus

efm8/src/main.c

@@ -79,7 +79,7 @@ void usb_write()
 {
 	data uint8_t errors = 0;
 	USB_TX_COUNT += 64;
-	while (USB_STATUS_OK != (USBD_Write(EP3IN, writebackbuf, 64, true)))
+	while (USB_STATUS_OK != (USBD_Write(OUTPUT_ENDPOINT, writebackbuf, 64, true)))
 	{
 		delay(2);
 		if (errors++ > 30)
@@ -89,7 +89,7 @@ void usb_write()
 		}
 	}
 }
-
+extern USBD_Device_TypeDef  myUsbDevice;
 
 int main(void) {
 	data uint8_t k;
@@ -102,8 +102,10 @@ int main(void) {
 
 	enter_DefaultMode_from_RESET();
 
+
 	eeprom_init();
 
+
 	SCON0_TI = 1;
 	P2_B0 = 1;
 
@@ -121,6 +123,7 @@ int main(void) {
 
 	cprints("hello,world\r\n");
 
+
 	reset = RSTSRC;
 	cprintx("reset source: ", 1, reset);
 	if (reset != 0x10)
@@ -128,12 +131,6 @@ int main(void) {
 		RSTSRC = (1<<4);
 	}
 
-//	last_efm32_pin = SPI0FCN0;
-//	cprintx("spi fifo0 cntrl: ", 1, last_efm32_pin);
-//
-//	last_efm32_pin = SPI0FCN1;
-//	cprintx("spi fifo1 cntrl: ", 1, last_efm32_pin);
-
 	MSG_RDY_INT_PIN = 1;
 	SIGNAL_WRITE_BSY();
 
@@ -211,7 +208,7 @@ int main(void) {
 			t1 = millis();
 		}
 //		if (!USBD_EpIsBusy(EP2OUT) && !USBD_EpIsBusy(EP3IN) && lastcount==count)
-		if (!USBD_EpIsBusy(EP2OUT)  && lastcount==count)
+		if (!USBD_EpIsBusy(INPUT_ENDPOINT)  && lastcount==count)
 		{
 //			cprintd("sched read to ",1,(int)(hidmsgbuf + write_ptr*64));
 			if (count == BUFFER_SIZE)
@@ -220,7 +217,7 @@ int main(void) {
 			}
 			else
 			{
-				USBD_Read(EP2OUT, hidmsgbuf + write_ptr*64, 64, true);
+				USBD_Read(INPUT_ENDPOINT, hidmsgbuf + write_ptr*64, 64, true);
 			}
 		}
 

efm8/src/printing.c

@@ -63,6 +63,7 @@ static void int2str_reduce_n(char ** snum, uint32_t copy, uint8_t n)
     do
     {
         copy /= n;
+        ++*snum;
     }while(copy);
 }
 
@@ -72,8 +73,10 @@ static char xdata __int2str_buf[9];
 
 static void int2str_map_n(char ** snum, uint32_t i, uint8_t n)
 {
+	int c = 0;
     do
     {
+    	if (*snum <__int2str_buf) break;
         *--*snum = __digits[i % n];
         i /= n;
     }while(i);

lib/efm8_assert/assert.c

@@ -5,8 +5,11 @@
  *****************************************************************************/
 
 #ifndef NDEBUG
-void slab_Assert()
+void slab_Assert( const char * file, int line )
 {
+  file = file;
+  line = line;
+
   while ( 1 );
 }
 #endif

lib/efm8_assert/assert.h

@@ -51,9 +51,9 @@
   #ifdef  USER_ASSERT
     #define SLAB_ASSERT(expr)    ((expr) ? ((void)0) : USER_ASSERT( __FILE__, __LINE__ ))
   #else
-    void slab_Assert();
+    void slab_Assert( const char * file, int line );
     //Yes this is smaller than if(!expr){assert}
-    #define SLAB_ASSERT(expr)    if(expr){}else{slab_Assert();}
+    #define SLAB_ASSERT(expr)    if(expr){}else{slab_Assert( __FILE__, __LINE__ );}
   #endif
 #endif
 

lib/efm8_usb/Readme.txt

@@ -20,7 +20,7 @@ Known Issues and Limitations:
 Target and Tool Chain Information:
 ---------------------------------
 
-Target:         EFM8UB1, EFM8UB2, EFM8UB3, EFM8UB4, C8051F320/1, C8051F326/7, C8051F34x, C8051F38x
+Target:         EFM8UB1, EFM8UB2, C8051F320/1, C8051F326/7, C8051F34x, C8051F38x
 Tool chain:     Keil
 
 File List:
@@ -51,13 +51,6 @@ Version 1.0.1
       USB_PWRSAVE_MODE_FASTWAKE was enabled.
     - Improved documentation of USB_PWRSAVE_MODE_FASTWAKE feature.
 
-Version 1.0.2
-    - Added ability to detect short OUT packet in Isochronous mode and
-      stuff the buffer with zeroes to keep isochronous stream in sync.
-
-Version 1.0.3
-    - Added support for EFM8UB3 and EFM8UB4 devices.
-
 -------------------------------------------------------------------------------
  End Of File
 -------------------------------------------------------------------------------

lib/efm8_usb/inc/efm8_usb.h

@@ -21,7 +21,6 @@
  *
  *   @section usb_device_contents Contents
  *
- *   @li @ref usb_device_library_revision
  *   @li @ref usb_device_intro
  *   @li @ref usb_device_api
  *   @li @ref usb_device_conf
@@ -29,9 +28,6 @@
  *   @li @ref usb_device_transfers
  *   @li @ref usb_device_pitfalls
  *
- *   @n @section usb_device_library_revision EFM8 USB Library Revision
- *   Library Revision: 1.0.3
- *
  *   @n @section usb_device_intro Introduction
  *
  *   The USB device protocol stack provides an API which makes it possible to
@@ -112,10 +108,11 @@
  *
  *   @ref USBD_RemoteWakeup() @n
  *    Used in SUSPENDED state (see @ref USB_Status_TypeDef) to signal resume to
- *    host. The function will be called automatically by the library if the
+ *    host. It's the applications responsibility to adhere to the USB standard
- *    @ref USBD_RemoteWakeupCb() function returns true. The function will
+ *    which states that a device can not signal resume before it has been
- *    also check that the host has sent a SET_FEATURE request to enable Remote
+ *    SUSPENDED for at least 5 ms. The function will also check that the host
- *    Wakeup before issuing the resume.
+ *    has sent a SET_FEATURE request to enable Remote Wakeup before issuing the
+ *    resume.
  *
  *   @ref USBD_GetUsbState() @n
  *    Returns the device USB state (see @ref USBD_State_TypeDef). Refer to
@@ -263,16 +260,6 @@
  * #define SLAB_USB_LANGUAGE                 USB_LANGID_ENUS
  *
  * // -----------------------------------------------------------------------------
- * // Enable use of UTF-8 strings for string descriptors.
- * // If this option is enabled then packed string descriptors that are created
- * // with UTF8_PACKED_STATIC_CONST_STRING_DESC() can be UTF-8 encoded and they
- * // will be decoded into UCS-2 16-bit wide character format used for USB string
- * // descriptors.  If this feature is not needed then it can be disabled to save
- * // some code memory space. 
- * // -----------------------------------------------------------------------------
- * #define SLAB_USB_UTF8_STRINGS             1
- *
- * // -----------------------------------------------------------------------------
  * // Set the power saving mode
  * //
  * // SLAB_USB_PWRSAVE_MODE configures when the device will automatically enter
@@ -282,17 +269,9 @@
  * //   USB_PWRSAVE_MODE_ONSUSPEND - Enter USB power-save mode on USB suspend
  * //   USB_PWRSAVE_MODE_ONVBUSOFF - Enter USB power-save mode when not attached
  * //                                to the USB host.
- * //   USB_PWRSAVE_MODE_FASTWAKE  - Exit USB power-save mode more quickly, but
+ * //   USB_PWRSAVE_MODE_FASTWAKE  - Exit USB power-save mode more quickly.
- * //                                consume more power while in USB power-save
+ * //                                This is useful for some applications that
- * //                                mode.
+ * //                                support remote wakeup.
- * //                                While the device is in USB power-save mode
- * //                                (typically during USB suspend), the
- * //                                internal voltage regulator stays in normal
- * //                                power mode instead of entering suspend
- * //                                power mode.
- * //                                This is an advanced feature that may be
- * //                                useful in certain applications that support
- * //                                remote wakeup.
  * // -----------------------------------------------------------------------------
  * #define SLAB_USB_PWRSAVE_MODE             (USB_PWRSAVE_MODE_ONVBUSOFF \
  *                                            | USB_PWRSAVE_MODE_ONSUSPEND)
@@ -707,19 +686,14 @@
 #endif
 
 #ifndef UNREFERENCED_ARGUMENT
-#if defined __C51__
 /// Macro for removing unreferenced arguments from compiler warnings
 #define UNREFERENCED_ARGUMENT(arg) (0, arg)
-#elif defined __ICC8051__
-/// Macro for removing unreferenced arguments from compiler warnings
-#define UNREFERENCED_ARGUMENT(arg) ((void)arg)
-#endif
 #endif
 
 /***************************************************************************//**
  * @brief       Macro for creating USB-compliant UTF-16LE UNICODE string
  *              descriptor from a C string.
- * @details     This macro should be used for ASCII strings in which all
+ * @details     This macro should be used for UTF-8 strings in which all
  *              characters are represented by a single ASCII byte (i.e.
  *              U.S. English strings).
  *              The USB Library will expand variables created with this macro
@@ -736,71 +710,9 @@
  * @param       __val
  *              The value of the string descriptor
  ******************************************************************************/
-#define UTF16LE_PACKED_STATIC_CONST_STRING_DESC(__name, __val, __size) \
+#define UTF16LE_PACKED_STATIC_CONST_STRING_DESC(__name, __val) \
   SI_SEGMENT_VARIABLE(__name,  static const USB_StringDescriptor_TypeDef, SI_SEG_CODE) = \
-    { USB_STRING_DESCRIPTOR_UTF16LE_PACKED, __size * 2, USB_STRING_DESCRIPTOR, __val }
+    { USB_STRING_DESCRIPTOR_UTF16LE_PACKED, sizeof(__val) * 2, USB_STRING_DESCRIPTOR, __val }
-
-/***************************************************************************//**
- * @brief       Macro for creating USB-compliant UTF-16LE UNICODE string
- *              descriptor from a UTF-8 string.
- * @details     This macro should be used for UTF-8 strings in which all
- *              characters are represented by a valid UTF-8 byte sequence
- *              of 1-3 bytes per character.  The USB library will expand
- *              variables created with this macro by decoding the UTF-8
- *              sequence into 16-bit wide UCS-2 characters required for USB
- *              string descriptors.
- * @n@n         This example set an array named _manufacturer[]_ to a
- *              series of symbols: an anchor, a lightning bolt, and a
- *              fußball as the Manufacturer String:
- *
- *              #define MFR_STRING    "⚓⚡⚽"
- *
- *              // This string has 3 Unicode characters so the __len
- *              // parameter is 3, even though it will take 3 bytes to
- *              // represent each character
- *              UTF8_PACKED_STATIC_CONST_STRING_DESC(manufacturer[], 3, \
- *                                                   MFR_STRING);
- * @param       __name
- *              The name of the variable that holds the string descriptor
- * @param       __len
- *              Number of Unicode characters (or codepoints) in the string
- * @param       __val
- *              The value of the string descriptor
- ******************************************************************************/
-#define UTF8_PACKED_STATIC_CONST_STRING_DESC(__name, __len, __val) \
-  SI_SEGMENT_VARIABLE(__name,  static const USB_StringDescriptor_TypeDef, SI_SEG_CODE) = \
-    { USB_STRING_DESCRIPTOR_UTF8, (__len) * 2, USB_STRING_DESCRIPTOR, __val }
-
-/***************************************************************************//**
- * @brief       Macro for creating USB-compliant UTF-16LE UNICODE string
- *              descriptor from a UTF-8 string.
- * @details     This macro should be used for UTF-8 strings in which all
- *              characters are represented by a valid UTF-8 byte sequence
- *              of 1-3 bytes per character.  The USB library will expand
- *              variables created with this macro by decoding the UTF-8
- *              sequence into 16-bit wide UCS-2 characters required for USB
- *              string descriptors.
- * @n@n         This example set an array named _manufacturer[]_ to a
- *              series of symbols: an anchor, a lightning bolt, and a
- *              fußball as the Manufacturer String:
- *
- *              #define MFR_STRING    "⚓⚡⚽"
- *
- *              // This string has 3 Unicode characters so the __len
- *              // parameter is 3, even though it will take 3 bytes to
- *              // represent each character
- *              UTF8_PACKED_STATIC_CONST_STRING_DESC(manufacturer[], 3, \
- *                                                   MFR_STRING);
- * @param       __name
- *              The name of the variable that holds the string descriptor
- * @param       __len
- *              Number of Unicode characters (or codepoints) in the string
- * @param       __val
- *              The value of the string descriptor
- ******************************************************************************/
-#define UTF8_PACKED_STATIC_CONST_STRING_DESC(__name, __len, __val) \
-  SI_SEGMENT_VARIABLE(__name,  static const USB_StringDescriptor_TypeDef, SI_SEG_CODE) = \
-    { USB_STRING_DESCRIPTOR_UTF8, (__len) * 2, USB_STRING_DESCRIPTOR, __val }
 
 /***************************************************************************//**
  * @brief       Macro for creating USB-compliant UTF-16LE UNICODE string
@@ -867,8 +779,8 @@
  *              The value of the string descriptor
  ******************************************************************************/
 #define LANGID_STATIC_CONST_STRING_DESC(__name, __val) \
-  SI_SEGMENT_VARIABLE(__name,  static const USB_LangId_StringDescriptor_Typedef, SI_SEG_CODE) = \
+  SI_SEGMENT_VARIABLE(__name,  static const USB_LangId_StringDescriptor_Typedef, __code) = \
-    { htole16(((SLAB_USB_NUM_LANGUAGES * 2) + 2) + (USB_STRING_DESCRIPTOR << 8)), __val }
+    { (((SLAB_USB_NUM_LANGUAGES * 2) + 2) << 8) + USB_STRING_DESCRIPTOR, __val }
 
 /**  @} (end addtogroup efm8_usb_macros Macros) */
 
@@ -897,8 +809,7 @@ typedef enum
   USB_STATUS_DEVICE_RESET = -11,                ///< Device is/was reset.
   USB_STATUS_TIMEOUT = -12,                     ///< Transfer timeout.
   USB_STATUS_DEVICE_REMOVED = -13,              ///< Device was removed.
-  USB_STATUS_EP_RX_BUFFER_OVERRUN = -14,        ///< Not enough data in the Rx buffer to hold the
+  USB_STATUS_EP_RX_BUFFER_OVERRUN = -14         ///< Not enough data in the Rx buffer to hold the
-  USB_STATUS_DATA_ERROR = -15,                  ///< OUT packet had CRC or bit-stuffing error
                                                 ///< last received packet
 } USB_Status_TypeDef;
 
@@ -952,7 +863,7 @@ typedef enum
 #if (SLAB_USB_EP3OUT_USED)
   EP3OUT,
 #endif
-} USB_EP_Index_TypeDef;
+}USB_EP_Index_TypeDef;
 
 /// @brief USB Setup type.
 typedef struct
@@ -1083,7 +994,7 @@ typedef uint16_t USB_LangId_StringDescriptor_Typedef; ///< The language ID strin
 
 #if (SLAB_USB_NUM_LANGUAGES == 1)
 /// @brief USB String Table Structure.
-typedef SI_VARIABLE_SEGMENT_POINTER(, USB_StringDescriptor_TypeDef, SI_SEG_GENERIC) USB_StringTable_TypeDef;
+typedef USB_StringDescriptor_TypeDef * *USB_StringTable_TypeDef;
 #elif (SLAB_USB_NUM_LANGUAGES > 1)
 typedef struct
 {
@@ -1097,17 +1008,17 @@ typedef struct
 ///  the device.
 typedef struct
 {
-  SI_VARIABLE_SEGMENT_POINTER(deviceDescriptor, USB_DeviceDescriptor_TypeDef, SI_SEG_GENERIC);          ///< Pointer to the device descriptor
+  USB_DeviceDescriptor_TypeDef *deviceDescriptor; ///< Pointer to the device descriptor
-  SI_VARIABLE_SEGMENT_POINTER(configDescriptor, USB_ConfigurationDescriptor_TypeDef, SI_SEG_GENERIC);   ///< Pointer to the configuration descriptor
+  uint8_t *configDescriptor;                      ///< Pointer to the configuration descriptor
-  SI_VARIABLE_SEGMENT_POINTER(stringDescriptors, USB_StringTable_TypeDef, SI_SEG_GENERIC);              ///< Pointer to an array of string descriptor pointers
+  USB_StringTable_TypeDef *stringDescriptors;     ///< Pointer to an array of string descriptor pointers
-  uint8_t numberOfStrings;                                                                              ///< Number of strings in string descriptor array
+  uint8_t numberOfStrings;                        ///< Number of strings in string descriptor array
 } USBD_Init_TypeDef;
 
 /// @cond DO_NOT_INCLUDE_WITH_DOXYGEN
 // Endpoint structure
 typedef struct
 {
-  SI_VARIABLE_SEGMENT_POINTER(buf, uint8_t, SI_SEG_GENERIC);
+  uint8_t *buf;
   uint16_t remaining;
   USBD_EpState_TypeDef state;
   union
@@ -1171,9 +1082,9 @@ typedef struct
 #if SLAB_USB_SUPPORT_ALT_INTERFACES
   uint8_t interfaceAltSetting[SLAB_USB_NUM_INTERFACES];
 #endif
-  SI_VARIABLE_SEGMENT_POINTER(deviceDescriptor, USB_DeviceDescriptor_TypeDef, SI_SEG_GENERIC);
+  USB_DeviceDescriptor_TypeDef *deviceDescriptor;
-  SI_VARIABLE_SEGMENT_POINTER(configDescriptor, USB_ConfigurationDescriptor_TypeDef, SI_SEG_GENERIC);
+  USB_ConfigurationDescriptor_TypeDef *configDescriptor;
-  SI_VARIABLE_SEGMENT_POINTER(stringDescriptors, USB_StringTable_TypeDef, SI_SEG_GENERIC);
+  USB_StringTable_TypeDef *stringDescriptors;
 } USBD_Device_TypeDef;
 /// @endcond DO_NOT_INCLUDE_WITH_DOXYGEN
 
@@ -1307,10 +1218,6 @@ USB_Status_TypeDef USBDCH9_SetupCmd(void);
  *
  * Default setting is '1' and may be overridden by defining in 'usbconfig.h'.
  *
- * @note The EFM8UB1, EFM8UB3, and EFM8UB4 devices can be configured to ignore
- *       the voltage on the VBUS pin and to instead use that pin as GPIO. If
- *       this feature is used, SLAB_USB_BUS_POWERED should be set to '1' even if
- *       the device is not drawing its power from the VBUS line.
  *****************************************************************************/
 
 /**************************************************************************//**
@@ -1343,9 +1250,9 @@ USB_Status_TypeDef USBDCH9_SetupCmd(void);
  * @brief Enables/disables remote wakeup capability
  * @details Remote wakeup allow the USB device to wake the host from suspend.
  *   When enabled, the library will call @ref USBD_RemoteWakeupCb() to determine
- *   if the remote wakeup source caused the device to wake up. If it did, the
+ *   if the remote wakeup source caused the device to wake up. If it was, the
- *   library will exit suspend mode and call @ref USBD_RemoteWakeup() to wake
+ *   library will exit suspend mode and the application should call
- *   up the host.
+ *   @ref USBD_RemoteWakeup() to wake up the host.
  *
  * When '1' remote wakeup is enabled
  * When '0' remote wakeup is disabled
@@ -1673,25 +1580,6 @@ USB_Status_TypeDef USBDCH9_SetupCmd(void);
  *
  *****************************************************************************/
 
-/**************************************************************************//**
- * @def SLAB_USB_UTF8_STRINGS
- * @brief
- *  Enables UTF-8 string decoding for USB string descriptors that are created
- *  using @ref UTF8_PACKED_STATIC_CONST_STRING_DESC.
- *
- * @details
- * If this option is enabled, USB descriptor strings that are created using
- * @ref UTF8_PACKED_STATIC_CONST_STRING_DESC can be encoded as UTF-8 which
- * allows for Unicode characters (up to 16-bits wide) to be used for USB
- * string descriptors.  The UTF-8 strings will be decoded into UCS-2 16-bit
- * wide character format required by USB.  If this feature is not needed then
- * this option can be disabled to save code memory space.  If this option is
- * disabled, then @ref UTF8_PACKED_STATIC_CONST_STRING_DESC should not be used.
- *
- * Default setting is '0' and may be overridden by defining in 'usbconfig.h'.
- *
- *****************************************************************************/
-
 /**************************************************************************//**
  * @def SLAB_USB_PWRSAVE_MODE
  * @brief Configures the power-saving options supported by the device
@@ -1856,10 +1744,6 @@ USB_Status_TypeDef USBDCH9_SetupCmd(void);
 #define SLAB_USB_LANGUAGE                 USB_LANGID_ENUS
 #endif
 
-#ifndef SLAB_USB_UTF8_STRINGS
-#define SLAB_USB_UTF8_STRINGS             0
-#endif
-
 #ifndef SLAB_USB_PWRSAVE_MODE
 #define SLAB_USB_PWRSAVE_MODE             USB_PWRSAVE_MODE_ONSUSPEND
 #endif
@@ -1956,7 +1840,7 @@ USBD_State_TypeDef USBD_GetUsbState(void);
  * @return
  *   @ref USB_STATUS_OK on success, else an appropriate error code.
  ******************************************************************************/
-int8_t USBD_Init(SI_VARIABLE_SEGMENT_POINTER(p, const USBD_Init_TypeDef, SI_SEG_GENERIC));
+int8_t USBD_Init(const USBD_Init_TypeDef *p);
 
 /***************************************************************************//**
  * @brief
@@ -1983,7 +1867,7 @@ int8_t USBD_Init(SI_VARIABLE_SEGMENT_POINTER(p, const USBD_Init_TypeDef, SI_SEG_
  *   @ref USB_STATUS_OK on success, else an appropriate error code.
  ******************************************************************************/
 int8_t USBD_Read(uint8_t epAddr,
-                 SI_VARIABLE_SEGMENT_POINTER(dat, uint8_t, SI_SEG_GENERIC),
+                 uint8_t *dat,
                  uint16_t byteCount,
                  bool callback);
 
@@ -1992,9 +1876,10 @@ int8_t USBD_Read(uint8_t epAddr,
  *   Perform a remote wakeup signaling sequence.
  *
  * @note
- *   This function is typically called by the library if @ref
+ *   It is the responsibility of the application to ensure that remote wakeup
- *   USBD_RemoteWakeupCb() returns true, so it does not need to be called by
+ *   is not attempted before the device has been suspended for at least 5
- *   application code.
+ *   miliseconds. This function should not be called from within an interrupt
+ *   handler.
  *
  * @return
  *   @ref USB_STATUS_OK on success, else an appropriate error code.
@@ -2030,7 +1915,7 @@ void USBD_Run(void);
  * @return
  *   @ref USB_STATUS_OK on success, else an appropriate error code.
  ******************************************************************************/
-int8_t USBD_StallEp(uint8_t epAddr);
+int8_t USBD_StallEp(int8_t epAddr);
 
 /***************************************************************************//**
  * @brief
@@ -2089,7 +1974,7 @@ int8_t USBD_UnStallEp(uint8_t epAddr);
  *   @ref USB_STATUS_OK on success, else an appropriate error code.
  ******************************************************************************/
 int8_t USBD_Write(uint8_t epAddr,
-                  SI_VARIABLE_SEGMENT_POINTER(dat, uint8_t, SI_SEG_GENERIC),
+                  uint8_t *dat,
                   uint16_t byteCount,
                   bool callback);
 
@@ -2228,8 +2113,8 @@ USB_Status_TypeDef USBD_SetInterfaceCb(uint8_t interface, uint8_t altSetting);
  *  If remote wakeup is enabled via @ref SLAB_USB_REMOTE_WAKEUP_ENABLED, the
  *  USB library will query the application after waking from suspend to see if
  *  the remote wakeup source was the reason for the wakeup. If this function
- *  returns True, the library will call @ref USBD_RemoteWakeup() to wake up the
+ *  returns True, the library will exit suspend mode and the application should
- *  host and exit suspend mode.
+ *  call @ref USBD_RemoteWakeup() to wake up the host.
  * @return
  *  True if the remote wakeup source was the reason the device woke from
  *  suspend, false otherwise.
@@ -2311,8 +2196,8 @@ uint16_t USBD_XferCompleteCb(uint8_t epAddr, \
 
 /// @cond DO_NOT_INCLUDE_WITH_DOXYGEN
 // -------------------- FIFO Access Functions  ---------------------------------
-void USB_ReadFIFO(uint8_t fifoNum, uint8_t numBytes, SI_VARIABLE_SEGMENT_POINTER(dat, uint8_t, SI_SEG_GENERIC));
+void USB_ReadFIFO(uint8_t fifoNum, uint8_t numBytes, uint8_t *dat);
-void USB_WriteFIFO(uint8_t fifoNum, uint8_t numBytes, SI_VARIABLE_SEGMENT_POINTER(dat, uint8_t, SI_SEG_GENERIC), bool txPacket);
+void USB_WriteFIFO(uint8_t fifoNum, uint8_t numBytes, uint8_t *dat, bool txPacket);
 /// @endcond DO_NOT_INCLUDE_WITH_DOXYGEN
 
 // -------------------- Include Files ------------------------------------------

lib/efm8_usb/src/efm8_usbd.c

@@ -6,9 +6,9 @@
 
 #include "si_toolchain.h"
 #include "efm8_usb.h"
-#include "assert.h"
+//#include "assert.h"
 #include <stdint.h>
-
+#define SLAB_ASSERT(x)
 // -----------------------------------------------------------------------------
 // Global Variables
 
@@ -65,8 +65,8 @@ void USBD_AbortAllTransfers(void)
 
 int8_t USBD_AbortTransfer(uint8_t epAddr)
 {
-  SI_VARIABLE_SEGMENT_POINTER(ep, USBD_Ep_TypeDef, MEM_MODEL_SEG);
+  USBD_Ep_TypeDef MEM_MODEL_SEG *ep;
-  int8_t retVal = USB_STATUS_OK;
+  uint8_t retVal = USB_STATUS_OK;
   bool usbIntsEnabled;
 
   USB_SaveSfrPage();
@@ -150,7 +150,7 @@ void USBD_Disconnect(void)
 
 bool USBD_EpIsBusy(uint8_t epAddr)
 {
-  SI_VARIABLE_SEGMENT_POINTER(ep, USBD_Ep_TypeDef, MEM_MODEL_SEG);
+  USBD_Ep_TypeDef MEM_MODEL_SEG *ep;
 
   // Verify this is a valid endpoint address
   if (epAddr >= SLAB_USB_NUM_EPS_USED)
@@ -174,7 +174,7 @@ USBD_State_TypeDef USBD_GetUsbState(void)
   return myUsbDevice.state;
 }
 
-int8_t USBD_Init(SI_VARIABLE_SEGMENT_POINTER(p, const USBD_Init_TypeDef, SI_SEG_GENERIC))
+int8_t USBD_Init(const USBD_Init_TypeDef *p)
 {
   uint8_t i;
 
@@ -190,12 +190,12 @@ int8_t USBD_Init(SI_VARIABLE_SEGMENT_POINTER(p, const USBD_Init_TypeDef, SI_SEG_
   // Zero out the myUsbDevice struct, then initialize all non-zero members
   for (i = 0; i < sizeof(myUsbDevice); i++)
   {
-    *((SI_VARIABLE_SEGMENT_POINTER(, uint8_t, MEM_MODEL_SEG))&myUsbDevice + i) = 0;
+    *((uint8_t MEM_MODEL_SEG *)&myUsbDevice + i) = 0;
   }
 
   // Get the USB descriptors from p
   myUsbDevice.deviceDescriptor = p->deviceDescriptor;
-  myUsbDevice.configDescriptor = p->configDescriptor;
+  myUsbDevice.configDescriptor = (USB_ConfigurationDescriptor_TypeDef *)p->configDescriptor;
   myUsbDevice.stringDescriptors = p->stringDescriptors;
   myUsbDevice.numberOfStrings = p->numberOfStrings;
 
@@ -246,12 +246,12 @@ int8_t USBD_Init(SI_VARIABLE_SEGMENT_POINTER(p, const USBD_Init_TypeDef, SI_SEG_
 }
 
 int8_t USBD_Read(uint8_t epAddr,
-                 SI_VARIABLE_SEGMENT_POINTER(dat, uint8_t, SI_SEG_GENERIC),
+                 uint8_t *dat,
                  uint16_t byteCount,
                  bool callback)
 {
   bool usbIntsEnabled;
-  SI_VARIABLE_SEGMENT_POINTER(ep, USBD_Ep_TypeDef, MEM_MODEL_SEG);
+  USBD_Ep_TypeDef MEM_MODEL_SEG *ep;
 
   USB_SaveSfrPage();
 
@@ -432,13 +432,8 @@ void USBD_Stop(void)
 
 void USBD_Suspend(void)
 {
-#if (!(SLAB_USB_PWRSAVE_MODE & USB_PWRSAVE_MODE_FASTWAKE))
   uint8_t i;
-#endif
   bool regulatorEnabled, prefetchEnabled;
-#if SLAB_USB_REMOTE_WAKEUP_ENABLED
-  bool remoteWakeup = false;
-#endif
 
   USB_SaveSfrPage();
 
@@ -494,8 +489,7 @@ void USBD_Suspend(void)
       // wakeup event occurred. If so, exit USBD_Suspend().
       if (USB_IsSuspended() == true)
       {
-        remoteWakeup = USBD_RemoteWakeupCb();
+        if (USBD_RemoteWakeupCb() == true)
-        if (remoteWakeup == true)
         {
           break;
         }
@@ -510,13 +504,8 @@ void USBD_Suspend(void)
         break;
       }
 #endif
-
-#if ((!(SLAB_USB_PWRSAVE_MODE & USB_PWRSAVE_MODE_ONVBUSOFF)) || \
-       (SLAB_USB_BUS_POWERED))
     } while (USB_IsSuspended() == true);
-#else
+
-    } while ((USB_IsSuspended() == true) || (USB_IsVbusOn() == false));
-#endif
     // Restore the internal regulator
     if (regulatorEnabled == true)
     {
@@ -534,20 +523,6 @@ void USBD_Suspend(void)
     USB_SetNormalClock();
 #endif
     USB_EnableTransceiver();
-    
-#if SLAB_USB_REMOTE_WAKEUP_ENABLED
-    // If the device woke from suspend due to a remote wakeup source, call
-    // USBD_RemoteWakeup() here to wake up the host.
-    if (remoteWakeup == true)
-    {
-      // Wake up the host
-      if (USBD_RemoteWakeup() == USB_STATUS_OK)
-      {
-        // If the remote wakeup succeeded, transition out of  USB suspend state
-        USBD_SetUsbState(myUsbDevice.savedState);
-      }
-    }
-#endif
   }
 
   USB_RestoreSfrPage();
@@ -624,12 +599,12 @@ int8_t USBD_UnStallEp(uint8_t epAddr)
 }
 
 int8_t USBD_Write(uint8_t epAddr,
-                  SI_VARIABLE_SEGMENT_POINTER(dat, uint8_t, SI_SEG_GENERIC),
+                  uint8_t *dat,
                   uint16_t byteCount,
                   bool callback)
 {
   bool usbIntsEnabled;
-  SI_VARIABLE_SEGMENT_POINTER(ep, USBD_Ep_TypeDef, MEM_MODEL_SEG);
+  USBD_Ep_TypeDef MEM_MODEL_SEG *ep;
 
   USB_SaveSfrPage();
 

lib/efm8_usb/src/efm8_usbdch9.c

@@ -22,13 +22,14 @@ static USB_Status_TypeDef SetConfiguration(void);
 static USB_Status_TypeDef SetFeature(void);
 static USB_Status_TypeDef SetInterface(void);
 static void USBD_ActivateAllEps(bool forceIdle);
-static void EP0_Write(SI_VARIABLE_SEGMENT_POINTER(dat, uint8_t, SI_SEG_GENERIC), uint16_t numBytes);
+static void EP0_Write(uint8_t *dat, uint16_t numBytes);
+void SendEp0Stall(void);
 
 // -----------------------------------------------------------------------------
 // Global Variables
 
 extern SI_SEGMENT_VARIABLE(myUsbDevice, USBD_Device_TypeDef, MEM_MODEL_SEG);
-const SI_SEGMENT_VARIABLE(txZero[2], uint8_t, SI_SEG_CODE);
+SI_SEGMENT_VARIABLE(txZero[2], uint8_t, SI_SEG_CODE);
 
 // -----------------------------------------------------------------------------
 // Static Global Variables
@@ -91,6 +92,15 @@ USB_Status_TypeDef USBDCH9_SetupCmd(void)
       break;
   }
 
+  // Reset index to 0 in case one of the above commands modified it
+  USB_SetIndex(0);
+
+  // If the command resulted in an error, send a procedural stall
+  if (status == USB_STATUS_REQ_ERR)
+  {
+    SendEp0Stall();
+  }
+
   return status;
 }
 
@@ -228,7 +238,7 @@ static USB_Status_TypeDef GetConfiguration(void)
   {
     if (myUsbDevice.state == USBD_STATE_ADDRESSED)
     {
-      EP0_Write((SI_VARIABLE_SEGMENT_POINTER(, uint8_t, SI_SEG_GENERIC))txZero, 1);
+      EP0_Write(txZero, 1);
       retVal = USB_STATUS_OK;
     }
     else if (myUsbDevice.state == USBD_STATE_CONFIGURED)
@@ -257,7 +267,7 @@ static USB_Status_TypeDef GetDescriptor(void)
 
   uint8_t index;
   uint16_t length = 0;
-  SI_VARIABLE_SEGMENT_POINTER(dat, uint8_t, SI_SEG_GENERIC);
+  uint8_t *dat;
   USB_Status_TypeDef retVal = USB_STATUS_REQ_ERR;
 
   if (*((uint8_t *)&myUsbDevice.setup.bmRequestType) ==
@@ -272,7 +282,7 @@ static USB_Status_TypeDef GetDescriptor(void)
         {
           break;
         }
-        dat = (SI_VARIABLE_SEGMENT_POINTER(, uint8_t, SI_SEG_GENERIC))myUsbDevice.deviceDescriptor;
+        dat = (uint8_t *)myUsbDevice.deviceDescriptor;
         length = myUsbDevice.deviceDescriptor->bLength;
         break;
 
@@ -281,14 +291,14 @@ static USB_Status_TypeDef GetDescriptor(void)
         {
           break;
         }
-        dat = (SI_VARIABLE_SEGMENT_POINTER(, uint8_t, SI_SEG_GENERIC))myUsbDevice.configDescriptor;
+        dat = (uint8_t *)myUsbDevice.configDescriptor;
         length = le16toh(myUsbDevice.configDescriptor->wTotalLength);
         break;
 
       case USB_STRING_DESCRIPTOR:
   #if (SLAB_USB_NUM_LANGUAGES == 1)
 
-        dat = (SI_VARIABLE_SEGMENT_POINTER(, uint8_t, SI_SEG_GENERIC))myUsbDevice.stringDescriptors[index];
+        dat = (uint8_t *)myUsbDevice.stringDescriptors[index];
 
         // Index 0 is the language string. If SLAB_USB_NUM_LANGUAGES == 1, we
         // know the length will be 4 and the format will be UTF16LE.
@@ -317,7 +327,7 @@ static USB_Status_TypeDef GetDescriptor(void)
         // Index 0 is the language.
         if (index == 0)
         {
-          dat = ((SI_VARIABLE_SEGMENT_POINTER(, uint8_t, SI_SEG_GENERIC))myUsbDevice.stringDescriptors->languageArray[0][index]);
+          dat = ((uint8_t *)myUsbDevice.stringDescriptors->languageArray[0][index]);
           length = *((uint8_t *)dat);
           myUsbDevice.ep0String.encoding.type = USB_STRING_DESCRIPTOR_UTF16LE;
         }
@@ -335,7 +345,7 @@ static USB_Status_TypeDef GetDescriptor(void)
           }
           if ((langSupported == true) && (index < myUsbDevice.numberOfStrings))
           {
-            dat = ((SI_VARIABLE_SEGMENT_POINTER(, uint8_t, SI_SEG_GENERIC))myUsbDevice.stringDescriptors->languageArray[lang][index]);
+            dat = ((uint8_t *)myUsbDevice.stringDescriptors->languageArray[lang][index]);
             length = *(dat + USB_STRING_DESCRIPTOR_LENGTH);
             myUsbDevice.ep0String.encoding.type = *(dat + USB_STRING_DESCRIPTOR_ENCODING);
             dat += USB_STRING_DESCRIPTOR_LENGTH;
@@ -393,10 +403,10 @@ static USB_Status_TypeDef GetInterface(void)
     {
 #if (SLAB_USB_SUPPORT_ALT_INTERFACES)
       // Return the alternate setting for the specified interface
-      EP0_Write((SI_VARIABLE_SEGMENT_POINTER(, uint8_t, SI_SEG_GENERIC))&myUsbDevice.interfaceAltSetting[interface], 1);
+      EP0_Write(&myUsbDevice.interfaceAltSetting[interface], 1);
 #else
       // Alternate interfaces are not supported, so return 0x0000.
-      EP0_Write((SI_VARIABLE_SEGMENT_POINTER(, uint8_t, SI_SEG_GENERIC))&txZero, 1);
+      EP0_Write(&txZero, 1);
 #endif
       retVal = USB_STATUS_OK;
     }
@@ -531,7 +541,7 @@ static USB_Status_TypeDef GetStatus(void)
     // If the command was valid, send the requested status.
     if (retVal == USB_STATUS_OK)
     {
-      EP0_Write((SI_VARIABLE_SEGMENT_POINTER(, uint8_t, SI_SEG_GENERIC))&pStatus, 2);
+      EP0_Write((uint8_t *)&pStatus, 2);
     }
   }
 
@@ -858,11 +868,11 @@ static void USBD_ActivateAllEps(bool forceIdle)
  * @param       numBytes
  *              Number of bytes to transmit on Endpoint 0
  ******************************************************************************/
-static void EP0_Write(SI_VARIABLE_SEGMENT_POINTER(dat, uint8_t, SI_SEG_GENERIC), uint16_t numBytes)
+static void EP0_Write(uint8_t *dat, uint16_t numBytes)
 {
   if (myUsbDevice.ep0.state == D_EP_IDLE)
   {
-    myUsbDevice.ep0.buf = dat;
+    myUsbDevice.ep0.buf = (uint8_t *)dat;
     myUsbDevice.ep0.remaining = numBytes;
     myUsbDevice.ep0.state = D_EP_TRANSMITTING;
     myUsbDevice.ep0.misc.c = 0;

lib/efm8_usb/src/efm8_usbdep.c

@@ -40,16 +40,11 @@ static void USB_WriteFIFO_Code(uint8_t numBytes, SI_VARIABLE_SEGMENT_POINTER(dat
 
 // -------------------------------
 // Generic FIFO access functions
-static void USB_ReadFIFO_Generic(uint8_t numBytes, SI_VARIABLE_SEGMENT_POINTER(dat, uint8_t, SI_SEG_GENERIC), uint8_t fifoNum);
+static void USB_ReadFIFO_Generic(uint8_t numBytes, uint8_t *dat, uint8_t fifoNum);
-static void USB_WriteFIFO_Generic(uint8_t numBytes, SI_VARIABLE_SEGMENT_POINTER(dat, uint8_t, SI_SEG_GENERIC));
+static void USB_WriteFIFO_Generic(uint8_t numBytes, uint8_t *dat);
 
 #endif  // #ifdef SI_GPTR
 
-#if (SLAB_USB_EP3OUT_USED && (SLAB_USB_EP3OUT_TRANSFER_TYPE == USB_EPTYPE_ISOC))
-static void memclearXdata(SI_VARIABLE_SEGMENT_POINTER(s, uint8_t, SI_SEG_XDATA),
-                          uint16_t n);
-#endif
-
 // -----------------------------------------------------------------------------
 // Functions
 
@@ -67,7 +62,7 @@ static void memclearXdata(SI_VARIABLE_SEGMENT_POINTER(s, uint8_t, SI_SEG_XDATA),
 // If Isochronous mode is enabled and the max packet size is greater than 255,
 // break the FIFO reads up into multiple reads of 255 or less bytes.
 // ----------------------------------------------------------------------------
-void USB_ReadFIFOIso(uint8_t fifoNum, uint16_t numBytes, SI_VARIABLE_SEGMENT_POINTER(dat, uint8_t, SI_SEG_GENERIC))
+void USB_ReadFIFOIso(uint8_t fifoNum, uint16_t numBytes, uint8_t *dat)
 {
   uint8_t numBytesRead;
 
@@ -99,7 +94,7 @@ void USB_ReadFIFOIso(uint8_t fifoNum, uint16_t numBytes, SI_VARIABLE_SEGMENT_POI
 // If Isochronous mode is enabled and the max packet size is greater than 255,
 // break the FIFO writes up into multiple writes of 255 or less bytes.
 // ----------------------------------------------------------------------------
-void USB_WriteFIFOIso(uint8_t fifoNum, uint16_t numBytes, SI_VARIABLE_SEGMENT_POINTER(dat, uint8_t, SI_SEG_GENERIC))
+void USB_WriteFIFOIso(uint8_t fifoNum, uint16_t numBytes, uint8_t *dat)
 {
   uint8_t numBytesWrite;
 
@@ -322,6 +317,7 @@ void handleUsbIn3Int(void)
 void handleUsbOut1Int(void)
 {
   uint8_t count;
+
   USB_Status_TypeDef status;
   bool xferComplete = false;
 
@@ -361,7 +357,6 @@ void handleUsbOut1Int(void)
         myUsbDevice.ep1out.state = D_EP_IDLE;
         xferComplete = true;
       }
-
       status = USB_STATUS_OK;
       USB_EpnClearOutPacketReady();
     }
@@ -371,7 +366,6 @@ void handleUsbOut1Int(void)
       {
         myUsbDevice.ep1out.misc.bits.callback = false;
       }
-
       USBD_XferCompleteCb(EP1OUT, status, count, myUsbDevice.ep1out.remaining);
     }
   }
@@ -387,6 +381,7 @@ void handleUsbOut1Int(void)
 void handleUsbOut2Int(void)
 {
   uint8_t count;
+
   USB_Status_TypeDef status;
   bool xferComplete = false;
 
@@ -451,10 +446,19 @@ void handleUsbOut2Int(void)
  * @note        This function takes no parameters, but it uses the EP3OUT status
  *              variables stored in @ref myUsbDevice.ep3out.
  ******************************************************************************/
-#if ((SLAB_USB_EP3OUT_TRANSFER_TYPE == USB_EPTYPE_BULK) || (SLAB_USB_EP3OUT_TRANSFER_TYPE == USB_EPTYPE_INTR))
 void handleUsbOut3Int(void)
 {
+#if (SLAB_USB_EP3OUT_TRANSFER_TYPE == USB_EPTYPE_ISOC)
+  uint16_t nextIdx;
+#if (SLAB_USB_EP3OUT_MAX_PACKET_SIZE > 255)
+  uint16_t count;
+#else
   uint8_t count;
+#endif // ( SLAB_USB_EP3OUT_MAX_PACKET_SIZE > 255 )
+#else
+  uint8_t count;
+#endif // ( SLAB_USB_EP3OUT_TRANSFER_TYPE == USB_EPTYPE_ISOC )
+
   USB_Status_TypeDef status;
   bool xferComplete = false;
 
@@ -474,6 +478,7 @@ void handleUsbOut3Int(void)
       myUsbDevice.ep3out.misc.bits.outPacketPending = true;
       status = USB_STATUS_EP_ERROR;
     }
+#if  ((SLAB_USB_EP3OUT_TRANSFER_TYPE == USB_EPTYPE_BULK) || (SLAB_USB_EP3OUT_TRANSFER_TYPE == USB_EPTYPE_INTR))
     // Check for overrun of user buffer
     else if (myUsbDevice.ep3out.remaining < count)
     {
@@ -481,11 +486,12 @@ void handleUsbOut3Int(void)
       myUsbDevice.ep3out.misc.bits.outPacketPending = true;
       status = USB_STATUS_EP_RX_BUFFER_OVERRUN;
     }
+#endif
     else
     {
+#if  ((SLAB_USB_EP3OUT_TRANSFER_TYPE == USB_EPTYPE_BULK) || (SLAB_USB_EP3OUT_TRANSFER_TYPE == USB_EPTYPE_INTR))
       USB_ReadFIFO(3, count, myUsbDevice.ep3out.buf);
 
-      myUsbDevice.ep3out.misc.bits.outPacketPending = false;
       myUsbDevice.ep3out.remaining -= count;
       myUsbDevice.ep3out.buf += count;
 
@@ -494,7 +500,26 @@ void handleUsbOut3Int(void)
         myUsbDevice.ep3out.state = D_EP_IDLE;
         xferComplete = true;
       }
+#elif (SLAB_USB_EP3OUT_TRANSFER_TYPE == USB_EPTYPE_ISOC)
+      nextIdx = count + myUsbDevice.ep3outIsoIdx;
 
+      // In isochronous mode, a circular buffer is used to hold the data
+      // If the next index into the circular buffer passes the end of the
+      // buffer, make two calls to USB_ReadFIFOIso()
+      if (nextIdx > myUsbDevice.ep3out.remaining)
+      {
+        USB_ReadFIFOIso(3, myUsbDevice.ep3out.remaining - myUsbDevice.ep3outIsoIdx, &myUsbDevice.ep3out.buf[myUsbDevice.ep3outIsoIdx]);
+        myUsbDevice.ep3outIsoIdx = nextIdx - myUsbDevice.ep3out.remaining;
+        USB_ReadFIFOIso(3, myUsbDevice.ep3outIsoIdx, myUsbDevice.ep3out.buf);
+      }
+      else
+      {
+        USB_ReadFIFOIso(3, count, &myUsbDevice.ep3out.buf[myUsbDevice.ep3outIsoIdx]);
+        myUsbDevice.ep3outIsoIdx = nextIdx;
+      }
+#endif // ( ( SLAB_USB_EP3OUT_TRANSFER_TYPE == USB_EPTYPE_BULK ) || ( SLAB_USB_EP3OUT_TRANSFER_TYPE == USB_EPTYPE_INTR ) )
+
+      myUsbDevice.ep3out.misc.bits.outPacketPending = false;
       status = USB_STATUS_OK;
       USB_EpnClearOutPacketReady();
     }
@@ -505,175 +530,18 @@ void handleUsbOut3Int(void)
         myUsbDevice.ep3out.misc.bits.callback = false;
       }
 
+#if  ((SLAB_USB_EP3OUT_TRANSFER_TYPE == USB_EPTYPE_BULK) || (SLAB_USB_EP3OUT_TRANSFER_TYPE == USB_EPTYPE_INTR))
       USBD_XferCompleteCb(EP3OUT, status, count, myUsbDevice.ep3out.remaining);
-    }
-  }
-}
-
 #elif (SLAB_USB_EP3OUT_TRANSFER_TYPE == USB_EPTYPE_ISOC)
-void handleUsbOut3Int(void)
-{
-  uint16_t nextIdx;
-  uint16_t numZeroBytesFromCb;
-#if (SLAB_USB_EP3OUT_MAX_PACKET_SIZE > 255)
-  uint16_t count;
-#else
-  uint8_t count;
-#endif
-  USB_Status_TypeDef status = USB_STATUS_OK;
-  bool xferComplete = false;
-
-  USB_SetIndex(3);
-
-  if (USB_EpnOutGetSentStall())
-  {
-    USB_EpnOutClearSentStall();
-  }
-  else if (USB_EpnGetOutPacketReady())
-  {
-    count = USB_EpOutGetCount();
-
-    // If USBD_Read() has not been called, return an error
-    if (myUsbDevice.ep3out.state != D_EP_RECEIVING)
-    {
-      myUsbDevice.ep3out.misc.bits.outPacketPending = true;
-      status = USB_STATUS_EP_ERROR;
-    }
-    else
-    {
-      // DATERR bit set (i.e. CRC/bit-stuffing error)
-      if (USB_EpnGetDataError()
-      #ifdef SLAB_USB_ISOC_OUT_MIN_PACKET_SIZE
-          || (count < SLAB_USB_ISOC_OUT_MIN_PACKET_SIZE)
-      #endif
-      #ifdef SLAB_USB_ISOC_OUT_MAX_PACKET_SIZE
-          || (count > SLAB_USB_ISOC_OUT_MAX_PACKET_SIZE)
-      #endif
-      )
-      {
-        status = USB_STATUS_DATA_ERROR;
-      }
-
-#ifdef SLAB_USB_ISOC_OUT_PACKETSIZE_MOD2
-      if ((count % 2) != 0)
-      {
-        status = USB_STATUS_DATA_ERROR;
-      }
-#elif defined SLAB_USB_ISOC_OUT_PACKETSIZE_MOD4
-      if (( count % 4) != 0)
-      {
-        status = USB_STATUS_DATA_ERROR;
-      }
-#elif defined SLAB_USB_ISOC_OUT_PACKETSIZE_MOD6
-      if (count % 6) != 0)
-      {
-        status = USB_STATUS_DATA_ERROR;
-      }
-#endif
-
-      if (status == USB_STATUS_DATA_ERROR)
-      {
-        count = 0;
-        // Flush FIFO to get rid of bad packet
-        USB_EpnOutFlush();
-        myUsbDevice.ep3out.misc.bits.outPacketPending = false;
-        // Flush clears OPRDY, so no need to call USB_EpnClearOutPacketReady() now
-      }
-      else  // No data error
-      {
-        nextIdx = count + myUsbDevice.ep3outIsoIdx;
-
-        // In isochronous mode, a circular buffer is used to hold the data
-        // If the next index into the circular buffer passes the end of the
-        // buffer, make two calls to USB_ReadFIFOIso()
-        if (nextIdx > myUsbDevice.ep3out.remaining)
-        {
-          USB_ReadFIFOIso(3, myUsbDevice.ep3out.remaining - myUsbDevice.ep3outIsoIdx, &myUsbDevice.ep3out.buf[myUsbDevice.ep3outIsoIdx]);
-          myUsbDevice.ep3outIsoIdx = nextIdx - myUsbDevice.ep3out.remaining;
-          USB_ReadFIFOIso(3, myUsbDevice.ep3outIsoIdx, myUsbDevice.ep3out.buf);
-        }
-        else
-        {
-          USB_ReadFIFOIso(3, count, &myUsbDevice.ep3out.buf[myUsbDevice.ep3outIsoIdx]);
-          myUsbDevice.ep3outIsoIdx = nextIdx;
-        }
-
-        myUsbDevice.ep3out.misc.bits.outPacketPending = false;
-        USB_EpnClearOutPacketReady();
-      }
-    }
-
-    if (myUsbDevice.ep3out.misc.bits.callback == true)
-    {
-      if (xferComplete == true)
-      {
-        myUsbDevice.ep3out.misc.bits.callback = false;
-      }
 
       // In Isochronous mode, the meaning of the USBD_XferCompleteCb parameters changes:
       //   xferred is the number of bytes received in the last packet
       //   remaining is the current index into the circular buffer
-      numZeroBytesFromCb = USBD_XferCompleteCb(EP3OUT, status, count, myUsbDevice.ep3outIsoIdx);
+      USBD_XferCompleteCb(EP3OUT, status, count, myUsbDevice.ep3outIsoIdx);
-
+#endif
-      // If data error occurred, the callback return value specifies how many zero-valued bytes to queue
-      if (numZeroBytesFromCb && (status == USB_STATUS_DATA_ERROR))
-      {
-        uint16_t numZeroBytesToWrite;
-        SI_SEGMENT_VARIABLE_SEGMENT_POINTER(bufPtr,
-                                            uint8_t,
-                                            SI_SEG_XDATA,
-                                            SI_SEG_DATA);
-
-        // Clear status after calling USBD_XferCompleteCb()
-        status = USB_STATUS_OK;
-
-        // Add the specified number of zero-value bytes
-        nextIdx = numZeroBytesFromCb + myUsbDevice.ep3outIsoIdx;
-
-        // Next index is past the end of the buffer (requires two writes)
-        if (nextIdx > myUsbDevice.ep3out.remaining)
-        {
-          // Write up to the end of the buffer
-          numZeroBytesToWrite = myUsbDevice.ep3out.remaining - myUsbDevice.ep3outIsoIdx;
-          bufPtr = &myUsbDevice.ep3out.buf[myUsbDevice.ep3outIsoIdx];
-          memclearXdata(bufPtr, numZeroBytesToWrite);
-
-          // Write the rest, starting at beginning of buffer
-          myUsbDevice.ep3outIsoIdx = nextIdx - myUsbDevice.ep3out.remaining;
-          numZeroBytesToWrite = myUsbDevice.ep3outIsoIdx;
-          bufPtr = &myUsbDevice.ep3out.buf[0];
-          memclearXdata(bufPtr, numZeroBytesToWrite);
-        }
-        // Next index is not past the end of the buffer
-        else
-        {
-          bufPtr = &myUsbDevice.ep3out.buf[myUsbDevice.ep3outIsoIdx];
-          memclearXdata(bufPtr, numZeroBytesFromCb);
-          myUsbDevice.ep3outIsoIdx = nextIdx;
-        }
-      }
     }
   }
 }
-
-/***************************************************************************//**
- * @brief       Sets all elements in a contiguous array of XDATA to zero
- * @param       s
- *              Pointer to the block of memory to fill
- * @param       n
- *              Number of bytes to be set to the value
- ******************************************************************************/
-static void memclearXdata(SI_VARIABLE_SEGMENT_POINTER(s, uint8_t, SI_SEG_XDATA),
-                          uint16_t n)
-{
-  while (n)
-  {
-    *s++ = 0;
-    n--;
-  }
-}
-
-#endif  // #if ((SLAB_USB_EP3OUT_TRANSFER_TYPE == USB_EPTYPE_BULK) || (SLAB_USB_EP3OUT_TRANSFER_TYPE == USB_EPTYPE_INTR))
 #endif  // EP3OUT_USED
 
 /***************************************************************************//**
@@ -685,7 +553,7 @@ static void memclearXdata(SI_VARIABLE_SEGMENT_POINTER(s, uint8_t, SI_SEG_XDATA),
  * @param       dat
  *              Pointer to buffer to hold data read from the FIFO
  ******************************************************************************/
-void USB_ReadFIFO(uint8_t fifoNum, uint8_t numBytes, SI_VARIABLE_SEGMENT_POINTER(dat, uint8_t, SI_SEG_GENERIC))
+void USB_ReadFIFO(uint8_t fifoNum, uint8_t numBytes, uint8_t *dat)
 {
   if (numBytes > 0)
   {
@@ -699,7 +567,7 @@ void USB_ReadFIFO(uint8_t fifoNum, uint8_t numBytes, SI_VARIABLE_SEGMENT_POINTER
     switch (((SI_GEN_PTR_t *)&dat)->gptr.memtype)
     {
       case SI_GPTR_MTYPE_IDATA:
-        USB_ReadFIFO_Idata(numBytes, (SI_VARIABLE_SEGMENT_POINTER(, uint8_t, SI_SEG_IDATA))dat, fifoNum);
+        USB_ReadFIFO_Idata(numBytes, dat, fifoNum);
         break;
 
       // For some compilers, IDATA and DATA are treated the same.
@@ -712,7 +580,7 @@ void USB_ReadFIFO(uint8_t fifoNum, uint8_t numBytes, SI_VARIABLE_SEGMENT_POINTER
 #endif
 
       case SI_GPTR_MTYPE_XDATA:
-        USB_ReadFIFO_Xdata(numBytes, (SI_VARIABLE_SEGMENT_POINTER(, uint8_t, SI_SEG_XDATA))dat, fifoNum);
+        USB_ReadFIFO_Xdata(numBytes, dat, fifoNum);
         break;
 
       // For some compilers, XDATA and PDATA are treated the same.
@@ -750,7 +618,7 @@ void USB_ReadFIFO(uint8_t fifoNum, uint8_t numBytes, SI_VARIABLE_SEGMENT_POINTER
  *              If FALSE, the packet will be stored in the FIFO and the
  *              transmission must be started at a later time
  ******************************************************************************/
-void USB_WriteFIFO(uint8_t fifoNum, uint8_t numBytes, SI_VARIABLE_SEGMENT_POINTER(dat, uint8_t, SI_SEG_GENERIC), bool txPacket)
+void USB_WriteFIFO(uint8_t fifoNum, uint8_t numBytes, uint8_t *dat, bool txPacket)
 {
   USB_EnableWriteFIFO(fifoNum);
 
@@ -762,7 +630,7 @@ void USB_WriteFIFO(uint8_t fifoNum, uint8_t numBytes, SI_VARIABLE_SEGMENT_POINTE
   switch (((SI_GEN_PTR_t *)&dat)->gptr.memtype)
   {
     case SI_GPTR_MTYPE_IDATA:
-      USB_WriteFIFO_Idata(numBytes, (SI_VARIABLE_SEGMENT_POINTER(, uint8_t, SI_SEG_IDATA))dat);
+      USB_WriteFIFO_Idata(numBytes, dat);
       break;
 
     // For some compilers, IDATA and DATA are treated the same.
@@ -775,7 +643,7 @@ void USB_WriteFIFO(uint8_t fifoNum, uint8_t numBytes, SI_VARIABLE_SEGMENT_POINTE
 #endif
 
     case SI_GPTR_MTYPE_XDATA:
-      USB_WriteFIFO_Xdata(numBytes, (SI_VARIABLE_SEGMENT_POINTER(, uint8_t, SI_SEG_XDATA))dat);
+      USB_WriteFIFO_Xdata(numBytes, dat);
       break;
 
     // For some compilers, XDATA and PDATA are treated the same.
@@ -788,7 +656,7 @@ void USB_WriteFIFO(uint8_t fifoNum, uint8_t numBytes, SI_VARIABLE_SEGMENT_POINTE
 #endif
 
     case SI_GPTR_MTYPE_CODE:
-      USB_WriteFIFO_Code(numBytes, (SI_VARIABLE_SEGMENT_POINTER(, uint8_t, SI_SEG_CODE))dat);
+      USB_WriteFIFO_Code(numBytes, dat);
       break;
 
     default:
@@ -944,10 +812,10 @@ static void USB_ReadFIFO_Data(uint8_t numBytes, SI_VARIABLE_SEGMENT_POINTER(dat,
 {
   while (--numBytes)
   {
-    USB_GetFIFOByte(dat);
+    USB_GetFIFOByte(*dat);
     dat++;
   }
-  USB_GetLastFIFOByte(dat, fifoNum);
+  USB_GetLastFIFOByte(*dat, fifoNum);
 }
 
 /***************************************************************************//**
@@ -997,14 +865,14 @@ static void USB_WriteFIFO_Code(uint8_t numBytes, SI_VARIABLE_SEGMENT_POINTER(dat
  * @param       fifoNum
  *              USB FIFO to read
  ******************************************************************************/
-static void USB_ReadFIFO_Generic(uint8_t numBytes, SI_VARIABLE_SEGMENT_POINTER(dat, uint8_t, SI_SEG_GENERIC), uint8_t fifoNum)
+static void USB_ReadFIFO_Generic(uint8_t numBytes, uint8_t *dat, uint8_t fifoNum)
 {
   while (--numBytes)
   {
-    USB_GetFIFOByte(dat);
+    USB_GetFIFOByte(*dat);
     dat++;
   }
-  USB_GetLastFIFOByte(dat, fifoNum);
+  USB_GetLastFIFOByte(*dat, fifoNum);
 }
 
 /***************************************************************************//**
@@ -1016,7 +884,7 @@ static void USB_ReadFIFO_Generic(uint8_t numBytes, SI_VARIABLE_SEGMENT_POINTER(d
  * @param       dat
  *              Pointer to generic buffer holding data to write to the FIFO
  ******************************************************************************/
-static void USB_WriteFIFO_Generic(uint8_t numBytes, SI_VARIABLE_SEGMENT_POINTER(dat, uint8_t, SI_SEG_GENERIC))
+static void USB_WriteFIFO_Generic(uint8_t numBytes, uint8_t *dat)
 {
   while (numBytes--)
   {

lib/efm8_usb/src/efm8_usbdint.c

@@ -13,7 +13,7 @@
 // Global variables
 
 extern SI_SEGMENT_VARIABLE(myUsbDevice, USBD_Device_TypeDef, MEM_MODEL_SEG);
-extern SI_SEGMENT_VARIABLE(txZero[2], const uint8_t, SI_SEG_CODE);
+extern SI_SEGMENT_VARIABLE(txZero[2], uint8_t, SI_SEG_CODE);
 
 // -----------------------------------------------------------------------------
 // Function prototypes
@@ -48,12 +48,6 @@ void handleUsbOut3Int(void);
 
 void SendEp0Stall(void);
 
-#if SLAB_USB_UTF8_STRINGS == 1
-static uint8_t decodeUtf8toUcs2(
-                const uint8_t *pUtf8in,
-                SI_VARIABLE_SEGMENT_POINTER(pUcs2out, uint16_t, MEM_MODEL_SEG));
-#endif
-
 // -----------------------------------------------------------------------------
 // Functions
 
@@ -218,8 +212,6 @@ void usbIrqHandler(void)
  ******************************************************************************/
 static void handleUsbEp0Int(void)
 {
-  USB_Status_TypeDef retVal = USB_STATUS_REQ_UNHANDLED;
-
   USB_SetIndex(0);
 
   if (USB_Ep0SentStall() || USB_GetSetupEnd())
@@ -242,55 +234,32 @@ static void handleUsbEp0Int(void)
 
       // Vendor unique, Class or Standard setup commands override?
 #if SLAB_USB_SETUP_CMD_CB
-      retVal = USBD_SetupCmdCb(&myUsbDevice.setup);
+      if (USBD_SetupCmdCb(&myUsbDevice.setup) == USB_STATUS_REQ_UNHANDLED)
-
-      if (retVal == USB_STATUS_REQ_UNHANDLED)
       {
 #endif
-        if (myUsbDevice.setup.bmRequestType.Type == USB_SETUP_TYPE_STANDARD)
+      if (myUsbDevice.setup.bmRequestType.Type == USB_SETUP_TYPE_STANDARD)
-        {
-          retVal = USBDCH9_SetupCmd();
-        }
-#if SLAB_USB_SETUP_CMD_CB
-      }
-#endif
-
-      // Reset index to 0 in case the call to USBD_SetupCmdCb() or
-      // USBDCH9_SetupCmd() changed it.
-      USB_SetIndex(0);
-
-      // Put the Enpoint 0 hardware into the correct state here.
-      if (retVal == USB_STATUS_OK)
       {
-        // If wLength is 0, there is no Data Phase
+        USBDCH9_SetupCmd();
-        // Set both the Serviced Out Packet Ready and Data End bits
-        if (myUsbDevice.setup.wLength == 0)
-        {
-          USB_Ep0SetLastOutPacketReady();
-        }
-        // If wLength is non-zero, there is a Data Phase.
-        // Set only the Serviced Out Packet Ready bit.
-        else
-        {
-          USB_Ep0ServicedOutPacketReady();
-          
-#if SLAB_USB_SETUP_CMD_CB
-          // If OUT packet but callback didn't set up a USBD_Read and we are expecting a 
-          // data byte then we need to wait for the read to be setup and NACK packets until
-          // USBD_Read is called.
-          if ((myUsbDevice.setup.bmRequestType.Direction == USB_SETUP_DIR_OUT)
-              && (myUsbDevice.ep0.state != D_EP_RECEIVING))
-          {
-            myUsbDevice.ep0.misc.bits.waitForRead = true;
-          }
-#endif
-        }
       }
-      // If the setup transaction detected an error, send a stall
       else
       {
         SendEp0Stall();
       }
+#if SLAB_USB_SETUP_CMD_CB
+    }
+    else
+    {
+      // If in-packet but callback didn't setup a USBD_Read and we are expecting a data byte then
+      // we need to wait for the read to be setup and nack packets till USBD_Read is called.
+      if ((myUsbDevice.setup.bmRequestType.Direction == USB_SETUP_DIR_OUT)
+          && (myUsbDevice.ep0.state != D_EP_RECEIVING)
+          && (myUsbDevice.setup.wLength)
+          )
+      {
+        myUsbDevice.ep0.misc.bits.waitForRead = true;
+      }
+    }
+#endif
     }
     else if (myUsbDevice.ep0.state == D_EP_RECEIVING)
     {
@@ -312,9 +281,11 @@ static void handleUsbEp0Int(void)
  ******************************************************************************/
 static void USB_ReadFIFOSetup(void)
 {
-  SI_VARIABLE_SEGMENT_POINTER(ptr, uint16_t, MEM_MODEL_SEG) = (SI_VARIABLE_SEGMENT_POINTER(, uint16_t, MEM_MODEL_SEG))&myUsbDevice.setup;
+  uint16_t MEM_MODEL_SEG *ptr = &myUsbDevice.setup;
 
-  USB_ReadFIFO(0, 8, (SI_VARIABLE_SEGMENT_POINTER(, uint8_t, SI_SEG_GENERIC))ptr);
+  USB_ReadFIFO(0, 8, (uint8_t *)ptr);
+
+  USB_Ep0ServicedOutPacketReady();
 
   // Modify for Endian-ness of the compiler
   ptr[1] = le16toh(ptr[1]);
@@ -368,11 +339,9 @@ static void handleUsbResetInt(void)
   USB_EnableSuspendDetection();
   USB_EnableDeviceInts();
 
-  // If the device is bus-powered, always put it in the Default state.
+  // If VBUS is preset, put the device in the Default state.
-  // If the device is self-powered and VBUS is present, put the device in the
+  // Otherwise, put it in the Attached state.
-  // Default state. Otherwise, put it in the Attached state.
+#if (!(SLAB_USB_PWRSAVE_MODE & USB_PWRSAVE_MODE_ONVBUSOFF))
-#if (!SLAB_USB_BUS_POWERED) && \
-    (!(SLAB_USB_PWRSAVE_MODE & USB_PWRSAVE_MODE_ONVBUSOFF))
   if (USB_IsVbusOn())
   {
     USBD_SetUsbState(USBD_STATE_DEFAULT);
@@ -437,16 +406,12 @@ static void handleUsbEp0Tx(void)
   // Strings can use the USB_STRING_DESCRIPTOR_UTF16LE_PACKED type to pack
   // UTF16LE data without the zero's between each character.
   // If the current string is of type USB_STRING_DESCRIPTOR_UTF16LE_PACKED,
-  // unpack it by inserting a zero between each character in the string.
+  // unpacket it by inserting a zero between each character in the string.
-  if ((myUsbDevice.ep0String.encoding.type == USB_STRING_DESCRIPTOR_UTF16LE_PACKED)
+  if (myUsbDevice.ep0String.encoding.type == USB_STRING_DESCRIPTOR_UTF16LE_PACKED)
-#if SLAB_USB_UTF8_STRINGS == 1
-   || (myUsbDevice.ep0String.encoding.type == USB_STRING_DESCRIPTOR_UTF8)
-#endif
-     )
   {
     // If ep0String.encoding.init is true, this is the beginning of the string.
     // The first two bytes of the string are the bLength and bDescriptorType
-    // fields. These are not packed like the reset of the string, so write them
+    // fields. These are no packed like the reset of the string, so write them
     // to the FIFO and set ep0String.encoding.init to false.
     if (myUsbDevice.ep0String.encoding.init == true)
     {
@@ -459,36 +424,9 @@ static void handleUsbEp0Tx(void)
     // Insert a 0x00 between each character of the string.
     for (i = 0; i < count / 2; i++)
     {
-#if SLAB_USB_UTF8_STRINGS == 1
+      USB_WriteFIFO(0, 1, myUsbDevice.ep0.buf, false);
-      if (myUsbDevice.ep0String.encoding.type == USB_STRING_DESCRIPTOR_UTF8)
+      myUsbDevice.ep0.buf++;
-      {
+      USB_WriteFIFO(0, 1, &txZero, false);
-        SI_SEGMENT_VARIABLE(ucs2, uint16_t, MEM_MODEL_SEG);
-        uint8_t utf8count;
-
-        // decode the utf8 into ucs2 for usb string
-        utf8count = decodeUtf8toUcs2(myUsbDevice.ep0.buf, &ucs2);
-
-        // if consumed utf8 bytes is 0, it means either null byte was
-        // input or bad utf8 byte sequence.  Either way its an error and
-        // there's not much we can do.  So just advance the input string
-        // by one character and keep going until count is expired.
-        if (utf8count == 0)
-        {
-          utf8count = 1;
-        }
-
-        // adjust to next char in utf8 byte sequence
-        myUsbDevice.ep0.buf += utf8count;
-        ucs2 = htole16(ucs2); // usb 16-bit chars are little endian
-        USB_WriteFIFO(0, 2, (SI_VARIABLE_SEGMENT_POINTER(, uint8_t, SI_SEG_GENERIC))&ucs2, false);
-      }
-      else
-#endif
-      {
-        USB_WriteFIFO(0, 1, (SI_VARIABLE_SEGMENT_POINTER(, uint8_t, SI_SEG_GENERIC))myUsbDevice.ep0.buf, false);
-        myUsbDevice.ep0.buf++;
-        USB_WriteFIFO(0, 1, (SI_VARIABLE_SEGMENT_POINTER(, uint8_t, SI_SEG_GENERIC))&txZero, false);
-      }
     }
   }
   // For any data other than USB_STRING_DESCRIPTOR_UTF16LE_PACKED, just send the
@@ -588,98 +526,6 @@ void SendEp0Stall(void)
   USB_Ep0SendStall();
 }
 
-#if SLAB_USB_UTF8_STRINGS == 1
-/***************************************************************************//**
- *  Decodes UTF-8 to UCS-2 (16-bit) character encoding that is used
- *  for USB string descriptors.
- * 
- *  @param pUtf8in pointer to next character in UTF-8 string
- *  @param pUcs2out pointer to location for 16-bit character output
- * 
- *  Decodes a UTF-8 byte sequence into a single UCS-2 character.  This
- *  will only decode up to 16-bit code point and will not handle the
- *  21-bit case (4 bytes input).
- * 
- *  For valid cases, the UTF8 character sequence decoded into a 16-bit
- *  character and stored at the location pointed at by _pUcs2out_.
- *  The function will then return the number of input bytes that were
- *  consumed (1, 2, or 3).  The caller can use the return value to find
- *  the start of the next character sequence in a utf-8 string.
- * 
- *  If either of the input pointers are NULL, then 0 is returned.
- * 
- *  If the first input character is NULL, then the output 16-bit value
- *  will be set to NULL and the function will return 0.
- * 
- *  If any other invalid sequence is detected, then the 16-bit output
- *  will be set to the equivalent of the question mark character (0x003F)
- *  and the return code will be 0.
- * 
- *  @return count of UTF8 bytes consumed
- ******************************************************************************/
-static uint8_t decodeUtf8toUcs2(
-                const uint8_t *pUtf8in,
-                SI_VARIABLE_SEGMENT_POINTER(pUcs2out, uint16_t, MEM_MODEL_SEG))
-{
-  uint8_t ret = 0;
-
-  // check the input pointers
-  if (!pUtf8in || !pUcs2out)
-  {
-    return 0;
-  }
-
-  // set default decode to error '?';
-  *pUcs2out = '?';
-
-  // valid cases:
-  // 0xxxxxxx (7 bits)
-  // 110xxxxx 10xxxxxx (11 bits)
-  // 1110xxxx 10xxxxxx 10xxxxxx (16 bits)
-
-  // null input
-  if (pUtf8in[0] == 0)
-  {
-    *pUcs2out = 0;
-    ret = 0;
-  }
-
-  // 7-bit char
-  else if (pUtf8in[0] < 128)
-  {
-    *pUcs2out = pUtf8in[0];
-    ret = 1;
-  }
-
-  // 11-bit char
-  else if ((pUtf8in[0] & 0xE0) == 0xC0)
-  {
-    if ((pUtf8in[1] & 0xC0) == 0x80)
-    {
-      *pUcs2out = ((pUtf8in[0] & 0x1F) << 6) | (pUtf8in[1] & 0x3F);
-      ret = 2;
-    }
-  }
-
-  // 16-bit char
-  else if ((pUtf8in[0] & 0xF0) == 0xE0)
-  {
-    if ((pUtf8in[1] & 0xC0) == 0x80)
-    {
-      if ((pUtf8in[2] & 0xC0) == 0x80)
-      {
-        *pUcs2out = ((pUtf8in[0] & 0x0F) << 12)
-                  | ((pUtf8in[1] & 0x3F) << 6)
-                  | (pUtf8in[2] & 0x3F);
-        ret = 3;
-      }
-    }
-  }
-
-  return ret;
-}
-#endif // SLAB_USB_UTF8_STRINGS
-
 // This function is called from USBD_Init(). It forces the user project to pull
 // this module from the library so that the declared ISR can be seen and
 // included. If this is not done then this entire module by never be included

lib/efm8ub1/peripheralDrivers/inc/usb_0.h

@@ -10,6 +10,7 @@
 #include "SI_EFM8UB1_Register_Enums.h"
 #include <stdint.h>
 #include <stdbool.h>
+#include "efm8_config.h"
 
 /******************************************************************************/
 
@@ -167,7 +168,7 @@ extern void USB_DisableInts(void);
  * @brief       Returns state of USB interrupt enabler
  * @return      TRUE if USB interrupts are enabled, FALSE otherwise.
  ******************************************************************************/
-extern bool USB_GetIntsEnabled(void);
+bool USB_GetIntsEnabled(void);
 
 /***************************************************************************//**
  * @brief       Enables VBUS detection
@@ -324,7 +325,9 @@ extern void USB_SuspendTransceiver(void);
   do \
   { \
     SFRPAGE = PG3_PAGE; \
-    USB0XCN &= ~(USB0XCN_PHYEN__ENABLED | USB0XCN_Dp__HIGH | USB0XCN_Dn__HIGH);\
+    USB0XCN &= ~(USB0XCN_PHYEN__ENABLED \
+                 | USB0XCN_Dp__HIGH \
+                 | USB0XCN_Dn__HIGH); \
   } while (0)
 #endif
 
@@ -503,14 +506,14 @@ extern void USB_UnsuspendRegulator(void);
  * @brief       Determine if the internal regulator is enabled
  * @return      TRUE if the internal regulator is enabled, FALSE otherwise
  ******************************************************************************/
-extern bool USB_IsRegulatorEnabled(void);
+bool USB_IsRegulatorEnabled(void);
 
 /***************************************************************************//**
  * @brief       Disable the prefetch engine
  * @note        This function is implemented as a macro.
  ******************************************************************************/
 #ifdef IS_DOXYGEN
-extern void USB_DisablePrefetch(void);
+void USB_DisablePrefetch(void);
 #else
 #define USB_DisablePrefetch() \
   do \
@@ -525,7 +528,7 @@ extern void USB_DisablePrefetch(void);
  * @note        This function is implemented as a macro.
  ******************************************************************************/
 #ifdef IS_DOXYGEN
-extern void USB_EnablePrefetch(void);
+void USB_EnablePrefetch(void);
 #else
 #define USB_EnablePrefetch() \
   do \
@@ -539,12 +542,12 @@ extern void USB_EnablePrefetch(void);
  * @brief       Determine if the prefetch engine is enabled
  * @return      TRUE if prefetch engine is enabled, FALSE otherwise.
  ******************************************************************************/
-extern bool USB_IsPrefetchEnabled(void);
+bool USB_IsPrefetchEnabled(void);
 
 /***************************************************************************//**
  * @brief       Suspends internal oscillator
  ******************************************************************************/
-extern void USB_SuspendOscillator(void);
+void USB_SuspendOscillator(void);
 
 /***************************************************************************//**
  * @brief       Enables clock recovery in full speed mode
@@ -731,8 +734,7 @@ extern void USB_Ep0SetLastOutPacketReady(void);
 #ifdef IS_DOXYGEN
 extern void USB_Ep0SendStall(void);
 #else
-#define USB_Ep0SendStall() \
+#define USB_Ep0SendStall() USB_WRITE_BYTE(E0CSR, E0CSR_SDSTL__SET)
-  USB_WRITE_BYTE(E0CSR, (E0CSR_SOPRDY__SET | E0CSR_SDSTL__SET))
 #endif
 
 /***************************************************************************//**
@@ -964,7 +966,7 @@ extern bool USB_IsOut3IntActive(uint8_t OUT1INT_snapshot);
 extern void USB_SetSuspendIntActive(uint8_t CMINT_snapshot);
 #else
 #define USB_SetSuspendIntActive(CMINT_snapshot) \
-  ((CMINT_snapshot) |= CMINT_SUSINT__SET)
+  (CMINT_snapshot |= CMINT_SUSINT__SET)
 #endif
 
 /***************************************************************************//**
@@ -978,7 +980,7 @@ extern void USB_SetSuspendIntActive(uint8_t CMINT_snapshot);
 extern void USB_SetEp0IntActive(uint8_t IN1INT_snapshot);
 #else
 #define USB_SetEp0IntActive(IN1INT_snapshot) \
-  ((IN1INT_snapshot) |= IN1INT_EP0__SET)
+  (IN1INT_snapshot |= IN1INT_EP0__SET)
 #endif
 
 /***************************************************************************//**
@@ -992,7 +994,7 @@ extern void USB_SetEp0IntActive(uint8_t IN1INT_snapshot);
 extern void USB_SetIn1IntActive(uint8_t IN1INT_snapshot);
 #else
 #define USB_SetIn1IntActive(IN1INT_snapshot) \
-  ((IN1INT_snapshot) |= IN1INT_IN1__SET)
+  (IN1INT_snapshot |= IN1INT_IN1__SET)
 #endif
 
 /***************************************************************************//**
@@ -1006,7 +1008,7 @@ extern void USB_SetIn1IntActive(uint8_t IN1INT_snapshot);
 extern void USB_SetIn2IntActive(uint8_t IN1INT_snapshot);
 #else
 #define USB_SetIn2IntActive(IN1INT_snapshot) \
-  ((IN1INT_snapshot) |= IN1INT_IN2__SET)
+  (IN1INT_snapshot |= IN1INT_IN2__SET)
 #endif
 
 /***************************************************************************//**
@@ -1020,7 +1022,7 @@ extern void USB_SetIn2IntActive(uint8_t IN1INT_snapshot);
 extern void USB_SetIn3IntActive(uint8_t IN1INT_snapshot);
 #else
 #define USB_SetIn3IntActive(IN1INT_snapshot) \
-  ((IN1INT_snapshot) |= IN1INT_IN3__SET)
+  (IN1INT_snapshot |= IN1INT_IN3__SET)
 #endif
 
 /***************************************************************************//**
@@ -1034,7 +1036,7 @@ extern void USB_SetIn3IntActive(uint8_t IN1INT_snapshot);
 extern void USB_SetOut1IntActive(uint8_t OUT1INT_snapshot);
 #else
 #define USB_SetOut1IntActive(OUT1INT_snapshot) \
-  ((OUT1INT_snapshot) |= OUT1INT_OUT1__SET)
+  (OUT1INT_snapshot |= OUT1INT_OUT1__SET)
 #endif
 
 /***************************************************************************//**
@@ -1048,7 +1050,7 @@ extern void USB_SetOut1IntActive(uint8_t OUT1INT_snapshot);
 extern void USB_SetOut2IntActive(uint8_t OUT1INT_snapshot);
 #else
 #define USB_SetOut2IntActive(OUT1INT_snapshot) \
-  ((OUT1INT_snapshot) |= OUT1INT_OUT2__SET)
+  (OUT1INT_snapshot |= OUT1INT_OUT2__SET)
 #endif
 
 /***************************************************************************//**
@@ -1062,7 +1064,7 @@ extern void USB_SetOut2IntActive(uint8_t OUT1INT_snapshot);
 extern void USB_SetOut3IntActive(uint8_t OUT1INT_snapshot);
 #else
 #define USB_SetOut3IntActive(OUT1INT_snapshot) \
-  ((OUT1INT_snapshot) |= OUT1INT_OUT3__SET)
+  (OUT1INT_snapshot |= OUT1INT_OUT3__SET)
 #endif
 
 /***************************************************************************//**
@@ -1078,7 +1080,7 @@ extern void USB_EnableDeviceInts(void);
                   (CMIE_SOFE__ENABLED \
                    | CMIE_RSTINTE__ENABLED \
                    | CMIE_RSUINTE__ENABLED \
-                   | CMIE_SUSINTE__ENABLED))
+                   | CMIE_SUSINTE__ENABLED));
 #endif
 
 /***************************************************************************//**
@@ -1088,7 +1090,7 @@ extern void USB_EnableDeviceInts(void);
 #ifdef IS_DOXYGEN
 extern void USB_EnableSofInt(void);
 #else
-#define USB_EnableSofInt() USB_SET_BITS(CMIE, CMIE_SOFE__ENABLED)
+#define USB_EnableSofInt() USB_SET_BITS(CMIE, CMIE_SOFE__ENABLED);
 #endif
 
 /***************************************************************************//**
@@ -1098,7 +1100,7 @@ extern void USB_EnableSofInt(void);
 #ifdef IS_DOXYGEN
 extern void USB_DisableSofInt(void);
 #else
-#define USB_DisableSofInt() USB_CLEAR_BITS(CMIE, CMIE_SOFE__ENABLED)
+#define USB_DisableSofInt() USB_CLEAR_BITS(CMIE, CMIE_SOFE__ENABLED);
 #endif
 
 /***************************************************************************//**
@@ -1108,7 +1110,7 @@ extern void USB_DisableSofInt(void);
 #ifdef IS_DOXYGEN
 extern void USB_EnableResetInt(void);
 #else
-#define USB_EnableResetInt() USB_SET_BITS(CMIE, CMIE_RSTINTE__ENABLED)
+#define USB_EnableResetInt() USB_SET_BITS(CMIE, CMIE_RSTINTE__ENABLED);
 #endif
 
 /***************************************************************************//**
@@ -1118,7 +1120,7 @@ extern void USB_EnableResetInt(void);
 #ifdef IS_DOXYGEN
 extern void USB_DisableResetInt(void);
 #else
-#define USB_DisableResetInt() USB_CLEAR_BITS(CMIE, CMIE_RSTINTE__ENABLED)
+#define USB_DisableResetInt() USB_CLEAR_BITS(CMIE, CMIE_RSTINTE__ENABLED);
 #endif
 
 /***************************************************************************//**
@@ -1128,7 +1130,7 @@ extern void USB_DisableResetInt(void);
 #ifdef IS_DOXYGEN
 extern void USB_EnableResumeInt(void);
 #else
-#define USB_EnableResumeInt() USB_SET_BITS(CMIE, CMIE_RSUINTE__ENABLED)
+#define USB_EnableResumeInt() USB_SET_BITS(CMIE, CMIE_RSUINTE__ENABLED);
 #endif
 
 /***************************************************************************//**
@@ -1138,7 +1140,7 @@ extern void USB_EnableResumeInt(void);
 #ifdef IS_DOXYGEN
 extern void USB_DisableResumeInt(void);
 #else
-#define USB_DisableResumeInt() USB_CLEAR_BITS(CMIE, CMIE_RSUINTE__ENABLED)
+#define USB_DisableResumeInt() USB_CLEAR_BITS(CMIE, CMIE_RSUINTE__ENABLED);
 #endif
 
 /***************************************************************************//**
@@ -1148,7 +1150,7 @@ extern void USB_DisableResumeInt(void);
 #ifdef IS_DOXYGEN
 extern void USB_EnableSuspendInt(void);
 #else
-#define USB_EnableSuspendInt() USB_SET_BITS(CMIE, CMIE_SUSINTE__ENABLED)
+#define USB_EnableSuspendInt() USB_SET_BITS(CMIE, CMIE_SUSINTE__ENABLED);
 #endif
 
 /***************************************************************************//**
@@ -1158,7 +1160,7 @@ extern void USB_EnableSuspendInt(void);
 #ifdef IS_DOXYGEN
 extern void USB_DisableSuspendInt(void);
 #else
-#define USB_DisableSuspendInt() USB_CLEAR_BITS(CMIE, CMIE_SUSINTE__ENABLED)
+#define USB_DisableSuspendInt() USB_CLEAR_BITS(CMIE, CMIE_SUSINTE__ENABLED);
 #endif
 
 /***************************************************************************//**
@@ -1168,7 +1170,7 @@ extern void USB_DisableSuspendInt(void);
 #ifdef IS_DOXYGEN
 extern void USB_EnableEp0Int(void);
 #else
-#define USB_EnableEp0Int() USB_SET_BITS(IN1IE, IN1IE_EP0E__ENABLED)
+#define USB_EnableEp0Int() USB_SET_BITS(IN1IE, IN1IE_EP0E__ENABLED);
 #endif
 
 /***************************************************************************//**
@@ -1178,7 +1180,7 @@ extern void USB_EnableEp0Int(void);
 #ifdef IS_DOXYGEN
 extern void USB_DisableEp0Int(void);
 #else
-#define USB_DisableEp0Int() USB_CLEAR_BITS(IN1IE, IN1IE_EP0E__ENABLED)
+#define USB_DisableEp0Int() USB_CLEAR_BITS(IN1IE, IN1IE_EP0E__ENABLED);
 #endif
 
 /***************************************************************************//**
@@ -1188,7 +1190,7 @@ extern void USB_DisableEp0Int(void);
 #ifdef IS_DOXYGEN
 extern void USB_EnableIn1Int(void);
 #else
-#define USB_EnableIn1Int() USB_SET_BITS(IN1IE, IN1IE_IN1E__ENABLED)
+#define USB_EnableIn1Int() USB_SET_BITS(IN1IE, IN1IE_IN1E__ENABLED);
 #endif
 
 /***************************************************************************//**
@@ -1198,7 +1200,7 @@ extern void USB_EnableIn1Int(void);
 #ifdef IS_DOXYGEN
 extern void USB_DisableIn1Int(void);
 #else
-#define USB_DisableIn1Int() USB_CLEAR_BITS(IN1IE, IN1IE_IN1E__ENABLED)
+#define USB_DisableIn1Int() USB_CLEAR_BITS(IN1IE, IN1IE_IN1E__ENABLED);
 #endif
 
 /***************************************************************************//**
@@ -1208,7 +1210,7 @@ extern void USB_DisableIn1Int(void);
 #ifdef IS_DOXYGEN
 extern void USB_EnableIn2Int(void);
 #else
-#define USB_EnableIn2Int() USB_SET_BITS(IN1IE, IN1IE_IN2E__ENABLED)
+#define USB_EnableIn2Int() USB_SET_BITS(IN1IE, IN1IE_IN2E__ENABLED);
 #endif
 
 /***************************************************************************//**
@@ -1218,7 +1220,7 @@ extern void USB_EnableIn2Int(void);
 #ifdef IS_DOXYGEN
 extern void USB_DisableIn2Int(void);
 #else
-#define USB_DisableIn2Int() USB_CLEAR_BITS(IN1IE, IN1IE_IN2E__ENABLED)
+#define USB_DisableIn2Int() USB_CLEAR_BITS(IN1IE, IN1IE_IN2E__ENABLED);
 #endif
 
 /***************************************************************************//**
@@ -1228,7 +1230,7 @@ extern void USB_DisableIn2Int(void);
 #ifdef IS_DOXYGEN
 extern void USB_EnableIn3Int(void);
 #else
-#define USB_EnableIn3Int() USB_SET_BITS(IN1IE, IN1IE_IN3E__ENABLED)
+#define USB_EnableIn3Int() USB_SET_BITS(IN1IE, IN1IE_IN3E__ENABLED);
 #endif
 
 /***************************************************************************//**
@@ -1238,7 +1240,7 @@ extern void USB_EnableIn3Int(void);
 #ifdef IS_DOXYGEN
 extern void USB_DisableIn3Int(void);
 #else
-#define USB_DisableIn3Int() USB_CLEAR_BITS(IN1IE, IN1IE_IN3E__ENABLED)
+#define USB_DisableIn3Int() USB_CLEAR_BITS(IN1IE, IN1IE_IN3E__ENABLED);
 #endif
 
 /***************************************************************************//**
@@ -1248,7 +1250,7 @@ extern void USB_DisableIn3Int(void);
 #ifdef IS_DOXYGEN
 extern void USB_EnableOut1Int(void);
 #else
-#define USB_EnableOut1Int() USB_SET_BITS(OUT1IE, OUT1IE_OUT1E__ENABLED)
+#define USB_EnableOut1Int() USB_SET_BITS(OUT1IE, OUT1IE_OUT1E__ENABLED);
 #endif
 
 /***************************************************************************//**
@@ -1258,7 +1260,7 @@ extern void USB_EnableOut1Int(void);
 #ifdef IS_DOXYGEN
 extern void USB_DisableOut1Int(void);
 #else
-#define USB_DisableOut1Int() USB_CLEAR_BITS(OUT1IE, OUT1IE_OUT1E__ENABLED)
+#define USB_DisableOut1Int() USB_CLEAR_BITS(OUT1IE, OUT1IE_OUT1E__ENABLED);
 #endif
 
 /***************************************************************************//**
@@ -1268,7 +1270,7 @@ extern void USB_DisableOut1Int(void);
 #ifdef IS_DOXYGEN
 extern void USB_EnableOut2Int(void);
 #else
-#define USB_EnableOut2Int() USB_SET_BITS(OUT1IE, OUT1IE_OUT2E__ENABLED)
+#define USB_EnableOut2Int() USB_SET_BITS(OUT1IE, OUT1IE_OUT2E__ENABLED);
 #endif
 
 /***************************************************************************//**
@@ -1278,7 +1280,7 @@ extern void USB_EnableOut2Int(void);
 #ifdef IS_DOXYGEN
 extern void USB_DisableOut2Int(void);
 #else
-#define USB_DisableOut2Int() USB_CLEAR_BITS(OUT1IE, OUT1IE_OUT2E__ENABLED)
+#define USB_DisableOut2Int() USB_CLEAR_BITS(OUT1IE, OUT1IE_OUT2E__ENABLED);
 #endif
 
 /***************************************************************************//**
@@ -1288,7 +1290,7 @@ extern void USB_DisableOut2Int(void);
 #ifdef IS_DOXYGEN
 extern void USB_EnableOut3Int(void);
 #else
-#define USB_EnableOut3Int() USB_SET_BITS(OUT1IE, OUT1IE_OUT3E__ENABLED)
+#define USB_EnableOut3Int() USB_SET_BITS(OUT1IE, OUT1IE_OUT3E__ENABLED);
 #endif
 
 /***************************************************************************//**
@@ -1298,7 +1300,7 @@ extern void USB_EnableOut3Int(void);
 #ifdef IS_DOXYGEN
 extern void USB_DisableOut3Int(void);
 #else
-#define USB_DisableOut3Int() USB_CLEAR_BITS(OUT1IE, OUT1IE_OUT3E__ENABLED)
+#define USB_DisableOut3Int() USB_CLEAR_BITS(OUT1IE, OUT1IE_OUT3E__ENABLED);
 #endif
 
 /***************************************************************************//**
@@ -1308,7 +1310,7 @@ extern void USB_DisableOut3Int(void);
 #ifdef IS_DOXYGEN
 extern void USB_EnableEp1(void);
 #else
-#define USB_EnableEp1() USB_SET_BITS(EENABLE, EENABLE_EEN1__ENABLED)
+#define USB_EnableEp1() USB_SET_BITS(EENABLE, EENABLE_EEN1__ENABLED);
 #endif
 
 /***************************************************************************//**
@@ -1318,7 +1320,7 @@ extern void USB_EnableEp1(void);
 #ifdef IS_DOXYGEN
 extern void USB_DisableEp1(void);
 #else
-#define USB_DisableEp1() USB_CLEAR_BITS(EENABLE, EENABLE_EEN1__ENABLED)
+#define USB_DisableEp1() USB_CLEAR_BITS(EENABLE, EENABLE_EEN1__ENABLED);
 #endif
 
 /***************************************************************************//**
@@ -1328,7 +1330,7 @@ extern void USB_DisableEp1(void);
 #ifdef IS_DOXYGEN
 extern void USB_EnableEp2(void);
 #else
-#define USB_EnableEp2() USB_SET_BITS(EENABLE, EENABLE_EEN2__ENABLED)
+#define USB_EnableEp2() USB_SET_BITS(EENABLE, EENABLE_EEN2__ENABLED);
 #endif
 
 /***************************************************************************//**
@@ -1338,7 +1340,7 @@ extern void USB_EnableEp2(void);
 #ifdef IS_DOXYGEN
 extern void USB_DisableEp2(void);
 #else
-#define USB_DisableEp2() USB_CLEAR_BITS(EENABLE, EENABLE_EEN2__ENABLED)
+#define USB_DisableEp2() USB_CLEAR_BITS(EENABLE, EENABLE_EEN2__ENABLED);
 #endif
 
 /***************************************************************************//**
@@ -1348,7 +1350,7 @@ extern void USB_DisableEp2(void);
 #ifdef IS_DOXYGEN
 extern void USB_EnableEp3(void);
 #else
-#define USB_EnableEp3() USB_SET_BITS(EENABLE, EENABLE_EEN3__ENABLED)
+#define USB_EnableEp3() USB_SET_BITS(EENABLE, EENABLE_EEN3__ENABLED);
 #endif
 
 /***************************************************************************//**
@@ -1358,7 +1360,7 @@ extern void USB_EnableEp3(void);
 #ifdef IS_DOXYGEN
 extern void USB_DisableEp3(void);
 #else
-#define USB_DisableEp3() USB_CLEAR_BITS(EENABLE, EENABLE_EEN3__ENABLED)
+#define USB_DisableEp3() USB_CLEAR_BITS(EENABLE, EENABLE_EEN3__ENABLED);
 #endif
 
 /***************************************************************************//**
@@ -1368,7 +1370,7 @@ extern void USB_DisableEp3(void);
 #ifdef IS_DOXYGEN
 extern void USB_EpnDirectionOut(void);
 #else
-#define USB_EpnDirectionOut() USB_CLEAR_BITS(EINCSRH, EINCSRH_DIRSEL__IN)
+#define USB_EpnDirectionOut() USB_CLEAR_BITS(EINCSRH, EINCSRH_DIRSEL__IN);
 #endif
 
 /***************************************************************************//**
@@ -1378,7 +1380,7 @@ extern void USB_EpnDirectionOut(void);
 #ifdef IS_DOXYGEN
 extern void USB_EpnDirectionIn(void);
 #else
-#define USB_EpnDirectionIn() USB_SET_BITS(EINCSRH, EINCSRH_DIRSEL__IN)
+#define USB_EpnDirectionIn() USB_SET_BITS(EINCSRH, EINCSRH_DIRSEL__IN);
 #endif
 
 /***************************************************************************//**
@@ -1389,7 +1391,7 @@ extern void USB_EpnDirectionIn(void);
 extern void USB_EpnEnableSplitMode(void);
 #else
 #define USB_EpnEnableSplitMode() \
-    USB_SET_BITS(EINCSRH, EINCSRH_SPLIT__ENABLED)
+    USB_SET_BITS(EINCSRH, EINCSRH_SPLIT__ENABLED);
 #endif
 
 /***************************************************************************//**
@@ -1400,7 +1402,7 @@ extern void USB_EpnEnableSplitMode(void);
 extern void USB_EpnDisableSplitMode(void);
 #else
 #define USB_EpnDisableSplitMode() \
-    USB_CLEAR_BITS(EINCSRH, EINCSRH_SPLIT__ENABLED)
+    USB_CLEAR_BITS(EINCSRH, EINCSRH_SPLIT__ENABLED);
 #endif
 
 /***************************************************************************//**
@@ -1410,7 +1412,7 @@ extern void USB_EpnDisableSplitMode(void);
 #ifdef IS_DOXYGEN
 extern void USB_EpnInClearDataToggle(void);
 #else
-#define USB_EpnInClearDataToggle() USB_SET_BITS(EINCSRL, EINCSRL_CLRDT__BMASK)
+#define USB_EpnInClearDataToggle() USB_SET_BITS(EINCSRL, EINCSRL_CLRDT__BMASK);
 #endif
 
 /***************************************************************************//**
@@ -1420,7 +1422,7 @@ extern void USB_EpnInClearDataToggle(void);
 #ifdef IS_DOXYGEN
 extern void USB_EpnInClearSentStall(void);
 #else
-#define USB_EpnInClearSentStall() USB_WRITE_BYTE(EINCSRL, 0)
+#define USB_EpnInClearSentStall() USB_WRITE_BYTE(EINCSRL, 0);
 #endif
 
 /***************************************************************************//**
@@ -1430,7 +1432,7 @@ extern void USB_EpnInClearSentStall(void);
 #ifdef IS_DOXYGEN
 extern void USB_EpnInStall(void);
 #else
-#define USB_EpnInStall() USB_WRITE_BYTE(EINCSRL, EINCSRL_SDSTL__SET)
+#define USB_EpnInStall() USB_WRITE_BYTE(EINCSRL, EINCSRL_SDSTL__SET);
 #endif
 
 /***************************************************************************//**
@@ -1440,7 +1442,7 @@ extern void USB_EpnInStall(void);
 #ifdef IS_DOXYGEN
 extern void USB_EpnInEndStall(void);
 #else
-#define USB_EpnInEndStall() USB_WRITE_BYTE(EINCSRL, 0)
+#define USB_EpnInEndStall() USB_WRITE_BYTE(EINCSRL, 0);
 #endif
 
 /***************************************************************************//**
@@ -1452,7 +1454,7 @@ extern void USB_EpnInEndStall(void);
 extern void USB_EpnInEndStallAndClearDataToggle(void);
 #else
 #define USB_EpnInEndStallAndClearDataToggle() \
-    USB_WRITE_BYTE(EINCSRL, EINCSRL_CLRDT__BMASK)
+    USB_WRITE_BYTE(EINCSRL, EINCSRL_CLRDT__BMASK);
 #endif
 
 /***************************************************************************//**
@@ -1470,7 +1472,7 @@ extern void USB_EpnInFlush(void);
     { \
       USB_READ_BYTE(EINCSRL); \
     } while (USB0DAT & EINCSRL_FLUSH__SET); \
-  } while (0)
+  } while (0);
 #endif
 
 /***************************************************************************//**
@@ -1480,7 +1482,7 @@ extern void USB_EpnInFlush(void);
 #ifdef IS_DOXYGEN
 extern void USB_EpnInClearUnderrun(void);
 #else
-#define USB_EpnInClearUnderrun() USB_CLEAR_BITS(EINCSRL, EINCSRL_UNDRUN__SET)
+#define USB_EpnInClearUnderrun() USB_CLEAR_BITS(EINCSRL, EINCSRL_UNDRUN__SET);
 #endif
 
 /***************************************************************************//**
@@ -1490,7 +1492,7 @@ extern void USB_EpnInClearUnderrun(void);
 #ifdef IS_DOXYGEN
 extern void USB_EpnSetInPacketReady(void);
 #else
-#define USB_EpnSetInPacketReady() USB_SET_BITS(EINCSRL, EINCSRL_INPRDY__SET)
+#define USB_EpnSetInPacketReady() USB_SET_BITS(EINCSRL, EINCSRL_INPRDY__SET);
 #endif
 
 /***************************************************************************//**
@@ -1501,7 +1503,7 @@ extern void USB_EpnSetInPacketReady(void);
 extern void USB_EpnInEnableDoubleBuffer(void);
 #else
 #define USB_EpnInEnableDoubleBuffer() \
-    USB_SET_BITS(EINCSRH, EINCSRH_DBIEN__ENABLED)
+    USB_SET_BITS(EINCSRH, EINCSRH_DBIEN__ENABLED);
 #endif
 
 /***************************************************************************//**
@@ -1512,7 +1514,7 @@ extern void USB_EpnInEnableDoubleBuffer(void);
 extern void USB_EpnInDisableDoubleBuffer(void);
 #else
 #define USB_EpnInDisableDoubleBuffer() \
-    USB_CLEAR_BITS(EINCSRH, EINCSRH_DBIEN__ENABLED)
+    USB_CLEAR_BITS(EINCSRH, EINCSRH_DBIEN__ENABLED);
 #endif
 
 /***************************************************************************//**
@@ -1523,7 +1525,7 @@ extern void USB_EpnInDisableDoubleBuffer(void);
 extern void USB_EpnInEnableInterruptBulkMode(void);
 #else
 #define USB_EpnInEnableInterruptBulkMode() \
-    USB_CLEAR_BITS(EINCSRH, EINCSRH_ISO__ENABLED)
+    USB_CLEAR_BITS(EINCSRH, EINCSRH_ISO__ENABLED);
 #endif
 
 /***************************************************************************//**
@@ -1534,7 +1536,7 @@ extern void USB_EpnInEnableInterruptBulkMode(void);
 extern void USB_EpnInEnableIsochronousMode(void);
 #else
 #define USB_EpnInEnableIsochronousMode() \
-    USB_SET_BITS(EINCSRH, EINCSRH_ISO__ENABLED)
+    USB_SET_BITS(EINCSRH, EINCSRH_ISO__ENABLED);
 #endif
 
 /***************************************************************************//**
@@ -1545,7 +1547,7 @@ extern void USB_EpnInEnableIsochronousMode(void);
 extern void USB_EpnInEnableForcedDataToggle(void);
 #else
 #define USB_EpnInEnableForcedDataToggle() \
-    USB_SET_BITS(EINCSRH, EINCSRH_FCDT__ALWAYS_TOGGLE)
+    USB_SET_BITS(EINCSRH, EINCSRH_FCDT__ALWAYS_TOGGLE);
 #endif
 
 /***************************************************************************//**
@@ -1556,7 +1558,7 @@ extern void USB_EpnInEnableForcedDataToggle(void);
 extern void USB_EpnInDisableForcedDataToggle(void);
 #else
 #define USB_EpnInDisableForcedDataToggle() \
-    USB_CLEAR_BITS(EINCSRH, EINCSRH_FCDT__ALWAYS_TOGGLE)
+    USB_CLEAR_BITS(EINCSRH, EINCSRH_FCDT__ALWAYS_TOGGLE);
 #endif
 
 /***************************************************************************//**
@@ -1567,7 +1569,7 @@ extern void USB_EpnInDisableForcedDataToggle(void);
 extern void USB_EpnOutClearDataToggle(void);
 #else
 #define USB_EpnOutClearDataToggle() \
-    USB_SET_BITS(EOUTCSRL, EOUTCSRL_CLRDT__BMASK)
+    USB_SET_BITS(EOUTCSRL, EOUTCSRL_CLRDT__BMASK);
 #endif
 
 /***************************************************************************//**
@@ -1578,7 +1580,7 @@ extern void USB_EpnOutClearDataToggle(void);
 extern void USB_EpnOutClearSentStall(void);
 #else
 #define USB_EpnOutClearSentStall() \
-    USB_CLEAR_BITS(EOUTCSRL, EOUTCSRL_STSTL__BMASK)
+    USB_CLEAR_BITS(EOUTCSRL, EOUTCSRL_STSTL__BMASK);
 #endif
 
 /***************************************************************************//**
@@ -1589,7 +1591,7 @@ extern void USB_EpnOutClearSentStall(void);
 extern void USB_EpnOutStall(void);
 #else
 #define USB_EpnOutStall() \
-    USB_SET_BITS(EOUTCSRL, EOUTCSRL_SDSTL__SET)
+    USB_SET_BITS(EOUTCSRL, EOUTCSRL_SDSTL__SET);
 #endif
 
 /***************************************************************************//**
@@ -1599,7 +1601,7 @@ extern void USB_EpnOutStall(void);
 #ifdef IS_DOXYGEN
 extern void USB_EpnOutEndStall(void);
 #else
-#define USB_EpnOutEndStall() USB_CLEAR_BITS(EOUTCSRL, EOUTCSRL_SDSTL__SET)
+#define USB_EpnOutEndStall() USB_CLEAR_BITS(EOUTCSRL, EOUTCSRL_SDSTL__SET);
 #endif
 
 /***************************************************************************//**
@@ -1618,7 +1620,7 @@ extern void USB_EpnOutEndStallAndClearDataToggle(void);
     while (USB0ADR & USB0ADR_BUSY__SET) {} \
     USB0DAT |= EOUTCSRL_CLRDT__BMASK; \
     while (USB0ADR & USB0ADR_BUSY__SET) {} \
-  } while (0)
+  } while (0);
 #endif
 
 /***************************************************************************//**
@@ -1636,7 +1638,7 @@ extern void USB_EpnOutFlush(void);
     { \
       USB_READ_BYTE(EOUTCSRL); \
     } while (USB0DAT & EOUTCSRL_FLUSH__SET); \
-  } while (0)
+  } while (0);
 #endif
 
 /***************************************************************************//**
@@ -1646,7 +1648,7 @@ extern void USB_EpnOutFlush(void);
 #ifdef IS_DOXYGEN
 extern void USB_EpnOutClearOverrun(void);
 #else
-#define USB_EpnOutClearOverrun() USB_CLEAR_BITS(EOUTCSRL, EOUTCSRL_OVRUN__SET)
+#define USB_EpnOutClearOverrun() USB_CLEAR_BITS(EOUTCSRL, EOUTCSRL_OVRUN__SET);
 #endif
 
 /***************************************************************************//**
@@ -1657,7 +1659,7 @@ extern void USB_EpnOutClearOverrun(void);
 extern void USB_EpnClearOutPacketReady(void);
 #else
 #define USB_EpnClearOutPacketReady() \
-    USB_CLEAR_BITS(EOUTCSRL, EOUTCSRL_OPRDY__SET)
+    USB_CLEAR_BITS(EOUTCSRL, EOUTCSRL_OPRDY__SET);
 #endif
 
 /***************************************************************************//**
@@ -1668,7 +1670,7 @@ extern void USB_EpnClearOutPacketReady(void);
 extern void USB_EpnOutEnableDoubleBuffer(void);
 #else
 #define USB_EpnOutEnableDoubleBuffer() \
-    USB_SET_BITS(EOUTCSRH, EOUTCSRH_DBIEN__ENABLED)
+    USB_SET_BITS(EOUTCSRH, EOUTCSRH_DBIEN__ENABLED);
 #endif
 
 /***************************************************************************//**
@@ -1679,7 +1681,7 @@ extern void USB_EpnOutEnableDoubleBuffer(void);
 extern void USB_EpnOutDisableDoubleBuffer(void);
 #else
 #define USB_EpnOutDisableDoubleBuffer() \
-    USB_CLEAR_BITS(EOUTCSRH, EOUTCSRH_DBIEN__ENABLED)
+    USB_CLEAR_BITS(EOUTCSRH, EOUTCSRH_DBIEN__ENABLED);
 #endif
 
 /***************************************************************************//**
@@ -1690,7 +1692,7 @@ extern void USB_EpnOutDisableDoubleBuffer(void);
 extern void USB_EpnOutEnableInterruptBulkMode(void);
 #else
 #define USB_EpnOutEnableInterruptBulkMode() \
-    USB_CLEAR_BITS(EOUTCSRH, EOUTCSRH_ISO__ENABLED)
+    USB_CLEAR_BITS(EOUTCSRH, EOUTCSRH_ISO__ENABLED);
 #endif
 
 /***************************************************************************//**
@@ -1701,7 +1703,7 @@ extern void USB_EpnOutEnableInterruptBulkMode(void);
 extern void USB_EpnOutEnableIsochronousMode(void);
 #else
 #define USB_EpnOutEnableIsochronousMode() \
-    USB_SET_BITS(EOUTCSRH, EOUTCSRH_ISO__ENABLED)
+    USB_SET_BITS(EOUTCSRH, EOUTCSRH_ISO__ENABLED);
 #endif
 
 /***************************************************************************//**
@@ -1719,7 +1721,7 @@ extern void USB_EnableReadFIFO(uint8_t fifoNum);
     while (USB0ADR & USB0ADR_BUSY__SET) {} \
     USB0ADR = (USB0ADR_BUSY__SET \
                | USB0ADR_AUTORD__ENABLED \
-               | (FIFO0 | (fifoNum))); \
+               | (FIFO0 | fifoNum)); \
   } while (0)
 #endif
 
@@ -1742,13 +1744,13 @@ extern void USB_DisableReadFIFO(uint8_t fifoNum);
  * @note        This function is implemented as a macro.
  ******************************************************************************/
 #ifdef IS_DOXYGEN
-extern void USB_GetFIFOByte(uint8_t *readDat);
+extern void USB_GetFIFOByte(uint8_t * readDat);
 #else
 #define USB_GetFIFOByte(readDat) \
   do \
   { \
     while (USB0ADR & USB0ADR_BUSY__SET) {} \
-    *(readDat) = USB0DAT; \
+    readDat = USB0DAT; \
   } while (0)
 #endif
 
@@ -1764,14 +1766,14 @@ extern void USB_GetFIFOByte(uint8_t *readDat);
  * @note        This function is implemented as a macro.
  ******************************************************************************/
 #ifdef IS_DOXYGEN
-extern void USB_GetLastFIFOByte(uint8_t *readDat, uint8_t fifoNum);
+extern void USB_GetLastFIFOByte(uint8_t * readDat, uint8_t fifoNum);
 #else
 #define USB_GetLastFIFOByte(readDat, fifoNum) \
   do \
   { \
     while (USB0ADR & USB0ADR_BUSY__SET) {} \
-    USB0ADR = (FIFO0 | (fifoNum));\
+    USB0ADR = (FIFO0 | fifoNum);\
-    *(readDat) = USB0DAT; \
+    readDat = USB0DAT; \
   } while (0)
 #endif
 
@@ -1788,7 +1790,7 @@ extern void USB_EnableWriteFIFO(uint8_t fifoNum);
   do \
   { \
     while (USB0ADR & USB0ADR_BUSY__SET) {} \
-    USB0ADR = (FIFO0 | (fifoNum)); \
+    USB0ADR = (FIFO0 | fifoNum); \
   } while (0)
 #endif
 
@@ -1817,7 +1819,7 @@ extern void USB_SetFIFOByte(uint8_t writeDat);
   do \
   { \
     while (USB0ADR & USB0ADR_BUSY__SET) {} \
-    USB0DAT = (writeDat); \
+    USB0DAT = writeDat; \
   } while (0)
 #endif
 
@@ -1850,98 +1852,92 @@ extern void USB_RestoreSfrPage();
  * @param       epsel
  *              Endpoint index to target
  ******************************************************************************/
-extern void USB_SetIndex(uint8_t epsel);
+void USB_SetIndex(uint8_t epsel);
 
 /***************************************************************************//**
  * @brief       Reads the USB common interrupt register
  * @return      Value of CMINT
  ******************************************************************************/
-extern uint8_t USB_GetCommonInts(void);
+uint8_t USB_GetCommonInts(void);
 
 /***************************************************************************//**
  * @brief       Reads the USB in interrupt register
  * @return      Value of IN1INT
  ******************************************************************************/
-extern uint8_t USB_GetInInts(void);
+uint8_t USB_GetInInts(void);
 
 /***************************************************************************//**
  * @brief       Reads the out interrupt register
  * @return      Value of OUT1INT
  ******************************************************************************/
-extern uint8_t USB_GetOutInts(void);
+uint8_t USB_GetOutInts(void);
 
 /***************************************************************************//**
  * @brief       Reads the value in INDEX
  * @return      Value of INDEX
  ******************************************************************************/
-extern uint8_t USB_GetIndex(void);
+uint8_t USB_GetIndex(void);
 
 /***************************************************************************//**
  * @brief       Determines if the USB is currently suspended
  * @return      TRUE if USB is in suspend mode
  ******************************************************************************/
-extern bool USB_IsSuspended(void);
+bool USB_IsSuspended(void);
 
 /***************************************************************************//**
  * @brief       Gets Setup End state
  * @return      TRUE when a control transaction end before software has
  *              set the DATAEND bit.
  ******************************************************************************/
-extern bool USB_GetSetupEnd(void);
+bool USB_GetSetupEnd(void);
 
 /***************************************************************************//**
  * @brief       Determines if STALL was send on Endpoint 0
  * @return      TRUE after a STALL was sent on Endpoint 0
  ******************************************************************************/
-extern bool USB_Ep0SentStall(void);
+bool USB_Ep0SentStall(void);
 
 /***************************************************************************//**
  * @brief       Determines if Out Packet Ready is set on Endpoint 0
  * @return      TRUE if Out Packet Ready is set on Endpoint 0
  ******************************************************************************/
-extern bool USB_Ep0InPacketReady(void);
+bool USB_Ep0InPacketReady(void);
 
 /***************************************************************************//**
  * @brief       Determines if In Packet Ready is set on Endpoint 0
  * @return      TRUE if In Packet Ready is set on Endpoint 0
  ******************************************************************************/
-extern bool USB_Ep0OutPacketReady(void);
+bool USB_Ep0OutPacketReady(void);
 
 /***************************************************************************//**
  * @brief       Gets Endpoint 0 data count
  * @return      Number of received data bytes in the Endpoint 0 FIFO
  ******************************************************************************/
-extern uint8_t USB_Ep0GetCount(void);
+uint8_t USB_Ep0GetCount(void);
 
 /***************************************************************************//**
  * @brief       Checks if stall was sent on IN Endpoint N
  * @return      TRUE if stall was sent on IN Endpoint N, FALSE otherwise
  ******************************************************************************/
-extern bool USB_EpnInGetSentStall(void);
+bool USB_EpnInGetSentStall(void);
 
 /***************************************************************************//**
  * @brief       Checks if stall was sent on OUT Endpoint N
  * @return      TRUE if stall was sent on OUT Endpoint N, FALSE otherwise
  ******************************************************************************/
-extern bool USB_EpnGetInPacketReady(void);
+bool USB_EpnGetInPacketReady(void);
 
 /***************************************************************************//**
  * @brief       Checks if stall was sent on OUT Endpoint N
  * @return      TRUE if stall was sent on OUT Endpoint N, FALSE otherwise
  ******************************************************************************/
-extern bool USB_EpnOutGetSentStall(void);
+bool USB_EpnOutGetSentStall(void);
 
 /***************************************************************************//**
  * @brief       Gets OutPacketReady on OUT Endpoint N
  * @return      TRUE if OUTPacketReady is set, FALSE otherwise
  ******************************************************************************/
-extern bool USB_EpnGetOutPacketReady(void);
+bool USB_EpnGetOutPacketReady(void);
-
-/***************************************************************************//**
- * @brief       Gets DataError on OUT Endpoint N
- * @return      TRUE if Data Error bit is set, FALSE otherwise
- ******************************************************************************/
-extern bool USB_EpnGetDataError(void);
 
 /***************************************************************************//**
  * @brief       Gets number of bytes in the OUT FIFO
@@ -1949,27 +1945,27 @@ extern bool USB_EpnGetDataError(void);
  * @return      Number of bytes in the FIFO from the last received
  *              packet
  ******************************************************************************/
-extern uint16_t USB_EpOutGetCount(void);
+uint16_t USB_EpOutGetCount(void);
 
 /***************************************************************************//**
  * @brief       Reads the USB frame number
  * @return      The frame number on the most recent SOF packet
  ******************************************************************************/
-extern uint16_t USB_GetSofNumber(void);
+uint16_t USB_GetSofNumber(void);
 
 /***************************************************************************//**
  * @brief       Aborts pending IN transactions on the selected endpoint
  * @param       fifoNum
  *              Endpoint to abort
  ******************************************************************************/
-extern void USB_AbortInEp(uint8_t fifoNum);
+void USB_AbortInEp(uint8_t fifoNum);
 
 /***************************************************************************//**
  * @brief       Aborts pending OUT transactions on the selected endpoint
  * @param       fifoNum
  *              Endpoint to abort
  ******************************************************************************/
-extern void USB_AbortOutEp(uint8_t fifoNum);
+void USB_AbortOutEp(uint8_t fifoNum);
 
 /***************************************************************************//**
  * @brief       Activates the selected endpoint
@@ -1984,11 +1980,11 @@ extern void USB_AbortOutEp(uint8_t fifoNum);
  * @param       isoMode
  *              Set to 1 if endpoint is in isochronous mode, 0 if it is not
  ******************************************************************************/
-extern void USB_ActivateEp(uint8_t ep,
+void USB_ActivateEp(uint8_t ep,
-                           uint16_t packetSize,
+                    uint16_t packetSize,
-                           bool inDir,
+                    bool inDir,
-                           bool splitMode,
+                    bool splitMode,
-                           bool isoMode);
+                    bool isoMode);
 
 /**  @} (end addtogroup usb_0_runtime USB0 Runtime API) */
 /**  @} (end addtogroup usb_0_group USB0 Driver) */

lib/efm8ub1/peripheralDrivers/src/usb_0.c

@@ -18,7 +18,7 @@
 
 /**************************************************************************//**
  * @brief       Reads a 16-bit indirect USB register value
- * @param [in]  regAddr
+ * @param       regAddr
  *   Address of high byte of 16-bit USB indirect register to read
  * @return      16-bit register value
  *****************************************************************************/
@@ -127,12 +127,6 @@ bool USB_EpnGetOutPacketReady(void)
   return (bool)(USB0DAT & EOUTCSRL_OPRDY__SET);
 }
 
-bool USB_EpnGetDataError(void)
-{
-  USB_READ_BYTE(EOUTCSRL);
-  return (bool)(USB0DAT & EOUTCSRL_DATERR__SET);
-}
-
 uint16_t USB_EpOutGetCount(void)
 {
   return USB_GetShortRegister(EOUTCNTH);