shimun/solo
1
0
Fork 0
Code Issues Pull Requests Releases 1 Wiki Activity

passive operation works as is (refactor needed)

Browse Source
This commit is contained in:
Conor Patrick 2019-02-26 01:19:35 -05:00
parent 6128e86da2
commit 54b7f42056
9 changed files with 250 additions and 57 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
.gitignore vendored
View File

@ -80,3 +80,5 @@ env3/
.tags*
targets/*/docs/
main
builds/*

8
fido2/u2f.c
View File

@ -160,7 +160,7 @@ void u2f_set_writeback_buffer(CTAP_RESPONSE * resp)
_u2f_resp = resp;
}
static void dump_signature_der(uint8_t * sig)
void dump_signature_der(uint8_t * sig)
{
uint8_t sigder[72];
int len;
@ -183,7 +183,7 @@ static void u2f_make_auth_tag(struct u2f_key_handle * kh, uint8_t * appid, uint8
memmove(tag, hashbuf, CREDENTIAL_TAG_SIZE);
}
static int8_t u2f_new_keypair(struct u2f_key_handle * kh, uint8_t * appid, uint8_t * pubkey)
int8_t u2f_new_keypair(struct u2f_key_handle * kh, uint8_t * appid, uint8_t * pubkey)
{
ctap_generate_rng(kh->key, U2F_KEY_HANDLE_KEY_SIZE);
u2f_make_auth_tag(kh, appid, kh->tag);
@ -286,6 +286,7 @@ static int16_t u2f_register(struct u2f_register_request * req, bool fromNFC)
uint8_t i[] = {0x0,U2F_EC_FMT_UNCOMPRESSED};
struct u2f_key_handle key_handle;
static uint32_t count = 0;
uint8_t pubkey[64];
uint8_t hash[32];
uint8_t * sig = (uint8_t*)req;
@ -300,11 +301,12 @@ static int16_t u2f_register(struct u2f_register_request * req, bool fromNFC)
return U2F_SW_CONDITIONS_NOT_SATISFIED;
}
}
uint32_t t1 = millis();
if ( u2f_new_keypair(&key_handle, req->app, pubkey) == -1)
{
return U2F_SW_INSUFFICIENT_MEMORY;
}
printf1(TAG_NFC, "keygen time: %d ms\r\n", millis()-t1);
crypto_sha256_init();
crypto_sha256_update(i,1);

6
targets/stm32l432/src/ams.c
View File

@ -283,8 +283,8 @@ bool ams_init()
delay(2);
// Needs to be disabled for passive operation
// if (0)
if (1)
if (0)
// if (1)
{
// check connection
uint8_t productType = ams_read_reg(AMS_REG_PRODUCT_TYPE);
@ -327,7 +327,7 @@ bool ams_init()
ams_read_eeprom_block(AMS_CONFIG_BLOCK1_ADDR, block);
printf1(TAG_NFC,"conf1: "); dump_hex1(TAG_NFC,block,4);
uint8_t ic_cfg1 = AMS_CFG1_OUTPUT_RESISTANCE_100 | AMS_CFG1_VOLTAGE_LEVEL_2V1;
uint8_t ic_cfg1 = AMS_CFG1_OUTPUT_RESISTANCE_100 | AMS_CFG1_VOLTAGE_LEVEL_2V0;
uint8_t ic_cfg2 = AMS_CFG2_TUN_MOD;
if (block[0] != ic_cfg1 || block[1] != ic_cfg2)

5
targets/stm32l432/src/ams.h
View File

@ -127,6 +127,11 @@ int ams_state_is_valid(uint8_t regval);
#define AMS_CFG1_VOLTAGE_LEVEL_2V3 (0x04<<2)
#define AMS_CFG1_VOLTAGE_LEVEL_2V4 (0x05<<2)
#define AMS_CFG1_VOLTAGE_LEVEL_2V5 (0x06<<2)
#define AMS_CFG1_VOLTAGE_LEVEL_2V6 (0x07<<2)
#define AMS_CFG1_VOLTAGE_LEVEL_2V7 (0x08<<2)
#define AMS_CFG1_VOLTAGE_LEVEL_2V8 (0x09<<2)
#define AMS_CFG1_VOLTAGE_LEVEL_2V9 (0x0a<<2)
#define AMS_CFG1_VOLTAGE_LEVEL_3V0 (0x0b<<2)
#define AMS_CFG1_OUTPUT_RESISTANCE_ZZ 0x00
#define AMS_CFG1_OUTPUT_RESISTANCE_100 0x01

14
targets/stm32l432/src/device.c
View File

@ -25,7 +25,7 @@
#include "stm32l4xx_ll_gpio.h"
#include "stm32l4xx_ll_tim.h"
#include "stm32l4xx_ll_usart.h"
#include "stm32l4xx_ll_pwr.h"
#include "usbd_hid.h"
#include APP_CONFIG
@ -122,17 +122,19 @@ void device_reboot()
void device_init()
{
// hw_init(LOW_FREQUENCY);
// isLowFreq = 1;
hw_init(LOW_FREQUENCY);
isLowFreq = 1;
hw_init(HIGH_FREQUENCY);
isLowFreq = 0;
printf1(TAG_NFC,"PWR->CR1: %04x\r\n", LL_PWR_GetRegulVoltageScaling());
// hw_init(HIGH_FREQUENCY);
// isLowFreq = 0;
usbhid_init();
ctaphid_init();
ctap_init( 1 );
ctap_init( 0 );
#ifndef IS_BOOTLOADER
#if BOOT_TO_DFU

196
targets/stm32l432/src/init.c
View File

@ -48,7 +48,8 @@
#include "init.h"
#include APP_CONFIG
// KHz
#define CLOCK_RATE 24000
USBD_HandleTypeDef Solo_USBD_Device;
@ -56,7 +57,8 @@ static void LL_Init(void);
#define Error_Handler() _Error_Handler(__FILE__,__LINE__)
void _Error_Handler(char *file, int line);
void SystemClock_Config_LF28(void);
void SystemClock_Config_LF48(void);
void hw_init(int lowfreq)
{
@ -69,7 +71,24 @@ void hw_init(int lowfreq)
if (lowfreq)
{
// Under voltage
LL_PWR_SetRegulVoltageScaling(LL_PWR_REGU_VOLTAGE_SCALE2);
#if CLOCK_RATE == 48000
SystemClock_Config_LF48();
#elif CLOCK_RATE == 32000
SystemClock_Config_LF32();
#elif CLOCK_RATE == 28000
SystemClock_Config_LF28();
#elif CLOCK_RATE == 24000
SystemClock_Config_LF24();
#elif CLOCK_RATE == 20000
SystemClock_Config_LF20();
#elif CLOCK_RATE == 16000
SystemClock_Config_LF16();
#else
#error "Invalid clock rate selected"
#endif
LL_PWR_SetRegulVoltageScaling(LL_PWR_REGU_VOLTAGE_SCALE2);
}
else
{
@ -515,6 +534,154 @@ void SystemClock_Config_LF32(void)
}
// 28 MHz
void SystemClock_Config_LF28(void)
{
SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_PWREN);
LL_FLASH_SetLatency(LL_FLASH_LATENCY_1);
if(LL_FLASH_GetLatency() != LL_FLASH_LATENCY_1)
{
Error_Handler();
}
LL_PWR_SetRegulVoltageScaling(LL_PWR_REGU_VOLTAGE_SCALE1);
LL_RCC_HSI_Enable();
/* Wait till HSI is ready */
while(LL_RCC_HSI_IsReady() != 1)
{
}
LL_RCC_HSI_SetCalibTrimming(16);
LL_RCC_LSI_Enable();
/* Wait till LSI is ready */
while(LL_RCC_LSI_IsReady() != 1)
{
}
LL_RCC_MSI_Enable();
/* Wait till MSI is ready */
while(LL_RCC_MSI_IsReady() != 1)
{
}
LL_RCC_MSI_EnableRangeSelection();
LL_RCC_MSI_SetRange(LL_RCC_MSIRANGE_6);
LL_RCC_MSI_SetCalibTrimming(0);
LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSI, LL_RCC_PLLM_DIV_2, 28, LL_RCC_PLLR_DIV_8);
LL_RCC_PLL_EnableDomain_SYS();
LL_RCC_PLL_Enable();
/* Wait till PLL is ready */
while(LL_RCC_PLL_IsReady() != 1)
{
}
LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
/* Wait till System clock is ready */
while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL)
{
}
LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_1);
LL_RCC_SetAPB2Prescaler(LL_RCC_APB2_DIV_8);
LL_Init1msTick(28000000);
LL_SYSTICK_SetClkSource(LL_SYSTICK_CLKSOURCE_HCLK);
LL_SetSystemCoreClock(28000000);
LL_RCC_SetUSARTClockSource(LL_RCC_USART1_CLKSOURCE_PCLK2);
LL_RCC_SetRNGClockSource(LL_RCC_RNG_CLKSOURCE_MSI);
/* SysTick_IRQn interrupt configuration */
NVIC_SetPriority(SysTick_IRQn, NVIC_EncodePriority(NVIC_GetPriorityGrouping(),0, 0));
}
// 48 MHz
void SystemClock_Config_LF48(void)
{
SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_PWREN);
LL_FLASH_SetLatency(LL_FLASH_LATENCY_2);
if(LL_FLASH_GetLatency() != LL_FLASH_LATENCY_2)
{
Error_Handler();
}
LL_PWR_SetRegulVoltageScaling(LL_PWR_REGU_VOLTAGE_SCALE1);
LL_RCC_LSI_Enable();
/* Wait till LSI is ready */
while(LL_RCC_LSI_IsReady() != 1)
{
}
LL_RCC_MSI_Enable();
/* Wait till MSI is ready */
while(LL_RCC_MSI_IsReady() != 1)
{
}
LL_RCC_MSI_EnableRangeSelection();
LL_RCC_MSI_SetRange(LL_RCC_MSIRANGE_11);
LL_RCC_MSI_SetCalibTrimming(0);
LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_MSI);
/* Wait till System clock is ready */
while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_MSI)
{
}
LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_1);
LL_RCC_SetAPB2Prescaler(LL_RCC_APB2_DIV_16);
LL_Init1msTick(48000000);
LL_SYSTICK_SetClkSource(LL_SYSTICK_CLKSOURCE_HCLK);
LL_SetSystemCoreClock(48000000);
LL_RCC_SetUSARTClockSource(LL_RCC_USART1_CLKSOURCE_PCLK2);
LL_RCC_SetRNGClockSource(LL_RCC_RNG_CLKSOURCE_MSI);
/* SysTick_IRQn interrupt configuration */
NVIC_SetPriority(SysTick_IRQn, NVIC_EncodePriority(NVIC_GetPriorityGrouping(),0, 0));
}
// 20 MHz
void SystemClock_Config_LF20(void)
{
SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_PWREN);
}
void init_usb()
{
// enable USB power
@ -666,17 +833,18 @@ void init_gpio(void)
LL_GPIO_SetPinPull(SOLO_BUTTON_PORT,SOLO_BUTTON_PIN,LL_GPIO_PULL_UP);
#ifdef SOLO_AMS_IRQ_PORT
LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_GPIOC);
/**/
LL_GPIO_InitTypeDef GPIO_InitStruct;
GPIO_InitStruct.Pin = SOLO_AMS_IRQ_PIN;
GPIO_InitStruct.Mode = LL_GPIO_MODE_INPUT;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(SOLO_AMS_IRQ_PORT, &GPIO_InitStruct);
LL_GPIO_SetPinMode(SOLO_AMS_IRQ_PORT,SOLO_AMS_IRQ_PIN,LL_GPIO_MODE_INPUT);
LL_GPIO_SetPinPull(SOLO_AMS_IRQ_PORT,SOLO_AMS_IRQ_PIN,LL_GPIO_PULL_UP);
// SAVE POWER
// LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_GPIOC);
// /**/
// LL_GPIO_InitTypeDef GPIO_InitStruct;
// GPIO_InitStruct.Pin = SOLO_AMS_IRQ_PIN;
// GPIO_InitStruct.Mode = LL_GPIO_MODE_INPUT;
// GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
// LL_GPIO_Init(SOLO_AMS_IRQ_PORT, &GPIO_InitStruct);
//
//
// LL_GPIO_SetPinMode(SOLO_AMS_IRQ_PORT,SOLO_AMS_IRQ_PIN,LL_GPIO_MODE_INPUT);
// LL_GPIO_SetPinPull(SOLO_AMS_IRQ_PORT,SOLO_AMS_IRQ_PIN,LL_GPIO_PULL_UP);
#endif
}
@ -694,7 +862,7 @@ void init_millisecond_timer(int lf)
if (!lf)
TIM_InitStruct.Prescaler = 48000;
else
TIM_InitStruct.Prescaler = 24000;
TIM_InitStruct.Prescaler = CLOCK_RATE;
TIM_InitStruct.CounterMode = LL_TIM_COUNTERMODE_UP;
TIM_InitStruct.Autoreload = 90;

57
targets/stm32l432/src/nfc.c
View File

@ -8,6 +8,7 @@
#include "util.h"
#include "device.h"
#include "u2f.h"
#include "crypto.h"
#include "ctap_errors.h"
@ -156,7 +157,7 @@ bool nfc_write_response(uint8_t req0, uint16_t resp)
return nfc_write_response_ex(req0, NULL, 0, resp);
}
void nfc_write_response_chaining(uint8_t req0, uint8_t * data, int len)
void nfc_write_response_chaining(uint8_t req0, uint8_t * data, int len, int keepgoing)
{
uint8_t res[32 + 2];
int sendlen = 0;
@ -177,7 +178,7 @@ void nfc_write_response_chaining(uint8_t req0, uint8_t * data, int len)
memcpy(&res[1], &data[sendlen], vlen);
// if not a last block
if (vlen + sendlen < len)
if ((vlen + sendlen < len) || keepgoing)
{
res[0] |= 0x10;
}
@ -187,11 +188,11 @@ void nfc_write_response_chaining(uint8_t req0, uint8_t * data, int len)
sendlen += vlen;
// wait for transmit (32 bytes aprox 2,5ms)
if (!ams_wait_for_tx(10))
{
printf1(TAG_NFC, "TX timeout. slen: %d \r\n", sendlen);
break;
}
// if (!ams_wait_for_tx(10))
// {
// printf1(TAG_NFC, "TX timeout. slen: %d \r\n", sendlen);
// break;
// }
// if needs to receive R block (not a last block)
if (res[0] & 0x10)
@ -200,13 +201,14 @@ void nfc_write_response_chaining(uint8_t req0, uint8_t * data, int len)
int reclen;
if (!ams_receive_with_timeout(100, recbuf, sizeof(recbuf), &reclen))
{
printf1(TAG_NFC, "R block RX timeout.\r\n");
printf1(TAG_NFC, "R block RX timeout %d/%d.\r\n",sendlen,len);
break;
}
if (reclen != 1)
{
printf1(TAG_NFC, "R block length error. len: %d \r\n", reclen);
printf1(TAG_NFC, "R block length error. len: %d. %d/%d \r\n", reclen,sendlen,len);
dump_hex1(TAG_NFC, recbuf, reclen);
break;
}
@ -396,9 +398,10 @@ void nfc_process_iblock(uint8_t * buf, int len)
int selected;
uint8_t res[32];
uint32_t t1;
int l1;
CTAP_RESPONSE ctap_resp;
int status;
struct u2f_register_request * u2freq = (struct u2f_register_request *)payload;
printf1(TAG_NFC,"Iblock: ");
dump_hex1(TAG_NFC, buf, len);
@ -477,14 +480,24 @@ void nfc_process_iblock(uint8_t * buf, int len)
}
t1 = millis();
WTX_on(WTX_TIME_DEFAULT);
u2f_request_nfc(&buf[1], len, &ctap_resp);
if (!WTX_off())
return;
printf1(TAG_NFC, "U2F resp len: %d\r\n", ctap_resp.length);
printf1(TAG_NFC,"U2F Register processing %d (took %d)\r\n", millis(), millis() - t1);
nfc_write_response_chaining(buf[0], ctap_resp.data, ctap_resp.length);
// WTX_on(WTX_TIME_DEFAULT);
// SystemClock_Config_LF32();
// delay(300);
u2f_request_nfc(&buf[1], len, &ctap_resp);
// SystemClock_Config_LF16();
// if (!WTX_off())
// return;
printf1(TAG_NFC,"U2F Register P2 took %d\r\n", millis() - t1);
nfc_write_response_chaining(buf[0], ctap_resp.data, ctap_resp.length, 0 );
// printf1(TAG_NFC, "U2F resp len: %d\r\n", ctap_resp.length);
printf1(TAG_NFC,"U2F Register answered %d (took %d)\r\n", millis(), millis() - t1);
break;
@ -505,14 +518,14 @@ void nfc_process_iblock(uint8_t * buf, int len)
}
t1 = millis();
WTX_on(WTX_TIME_DEFAULT);
// WTX_on(WTX_TIME_DEFAULT);
u2f_request_nfc(&buf[1], len, &ctap_resp);
if (!WTX_off())
return;
// if (!WTX_off())
// return;
printf1(TAG_NFC, "U2F resp len: %d\r\n", ctap_resp.length);
printf1(TAG_NFC,"U2F Authenticate processing %d (took %d)\r\n", millis(), millis() - t1);
nfc_write_response_chaining(buf[0], ctap_resp.data, ctap_resp.length);
nfc_write_response_chaining(buf[0], ctap_resp.data, ctap_resp.length, 0);
printf1(TAG_NFC,"U2F Authenticate answered %d (took %d)\r\n", millis(), millis() - t1);
break;
@ -545,7 +558,7 @@ void nfc_process_iblock(uint8_t * buf, int len)
ctap_resp.data[ctap_resp.length - 1] = SW_SUCCESS & 0xff;
printf1(TAG_NFC,"CTAP processing %d (took %d)\r\n", millis(), millis() - t1);
nfc_write_response_chaining(buf[0], ctap_resp.data, ctap_resp.length);
nfc_write_response_chaining(buf[0], ctap_resp.data, ctap_resp.length, 0);
printf1(TAG_NFC,"CTAP answered %d (took %d)\r\n", millis(), millis() - t1);
break;

5
targets/stm32l432/src/redirect.c
View File

@ -42,6 +42,7 @@ void _putchar(char c)
int _write (int fd, const void *buf, long int len)
{
uint8_t * data = (uint8_t *) buf;
#if DEBUG_LEVEL>1
static uint8_t logbuf[1000] = {0};
static int logbuflen = 0;
if (logbuflen + len > sizeof(logbuf)) {
@ -56,11 +57,11 @@ int _write (int fd, const void *buf, long int len)
uint8_t res = CDC_Transmit_FS(logbuf, logbuflen);
if (res == USBD_OK)
logbuflen = 0;
#endif
// Send out UART serial
while(len--)
{
// _putchar(*data++);
_putchar(*data++);
}
return 0;
}

2
targets/stm32l432/src/system_stm32l4xx.c
View File

@ -220,7 +220,7 @@ void SystemInit(void)
/* Disable all interrupts */
RCC->CIER = 0x00000000U;
SystemClock_Config_LF24();
SystemClock_Config_LF16();
}