we use l432, not l442

targets/stm32l432/bootloader/bootloader.h

@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2018 SoloKeys, Inc. <https://solokeys.com/>
+ * 
+ * This file is part of Solo.
+ * 
+ * Solo is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ * 
+ * Solo is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with Solo.  If not, see <https://www.gnu.org/licenses/>
+ * 
+ * This code is available under licenses for commercial use.
+ * Please contact SoloKeys for more information.
+ */
+#ifndef _APP_H_
+#define _APP_H_
+#include <stdint.h>
+
+#define DEBUG_UART      USART1
+
+#ifndef DEBUG_LEVEL
+#define DEBUG_LEVEL     0
+#endif
+
+#define NON_BLOCK_PRINTING 0
+
+#define BOOT_TO_DFU         0
+
+
+#define IS_BOOTLOADER       1
+
+#define ENABLE_U2F_EXTENSIONS
+// #define ENABLE_U2F
+
+#define DISABLE_CTAPHID_PING
+#define DISABLE_CTAPHID_WINK
+#define DISABLE_CTAPHID_CBOR
+
+//                              0xRRGGBB
+#define LED_INIT_VALUE			0x0a0300
+#define LED_MAX_SCALER          40
+#define LED_MIN_SCALER          1
+// # of ms between each change in LED
+#define HEARTBEAT_PERIOD        5
+// Each LED channel will be multiplied by a integer between LED_MAX_SCALER
+// and LED_MIN_SCALER to cause the slow pulse.  E.g.
+// #define LED_INIT_VALUE			0x301000
+// #define LED_MAX_SCALER          30
+// #define LED_MIN_SCALER          1
+// #define HEARTBEAT_PERIOD        8
+// Will pulse from 0x301000 to 0x903000 to 0x301000 ...
+// Which will take ~8 * (30)*2 ms
+
+// Button
+#define SOLO_BUTTON_PORT        GPIOA
+#define SOLO_BUTTON_PIN         LL_GPIO_PIN_0
+
+#define SKIP_BUTTON_CHECK_WITH_DELAY        0
+#define SKIP_BUTTON_CHECK_FAST              1
+
+void printing_init();
+void hw_init(void);
+
+// Trigger software reset
+void device_reboot();
+
+int is_authorized_to_boot();
+int is_bootloader_disabled();
+void bootloader_heartbeat();
+
+#endif