add button, tune color

targets/stm32l442/src/app.h

@@ -31,6 +31,10 @@ void hw_init(void);
 
 #define LED_INIT_VALUE			0x001000
 
+// Button
+#define SOLO_BUTTON_PORT        GPIOA
+#define SOLO_BUTTON_PIN         LL_GPIO_PIN_0
 
+#define SKIP_BUTTON_CHECK       0
 
 #endif

targets/stm32l442/src/device.c

@@ -2,6 +2,7 @@
 #include "device.h"
 #include "usbd_def.h"
 #include "stm32l4xx.h"
+#include "stm32l4xx_ll_gpio.h"
 #include "stm32l4xx_ll_tim.h"
 #include "stm32l4xx_ll_usart.h"
 #include "usbd_hid.h"
@@ -18,6 +19,8 @@
 uint32_t __65_seconds = 0;
 extern PCD_HandleTypeDef hpcd;
 
+#define IS_BUTTON_PRESSED()         (0  == (LL_GPIO_ReadInputPort(SOLO_BUTTON_PORT) & SOLO_BUTTON_PIN))
+
 // Timer6 overflow handler
 void TIM6_DAC_IRQHandler()
 {
@@ -50,6 +53,9 @@ void delay(uint32_t ms)
 void device_init()
 {
     hw_init();
+    LL_GPIO_SetPinMode(SOLO_BUTTON_PORT,SOLO_BUTTON_PIN,LL_GPIO_MODE_INPUT);
+    LL_GPIO_SetPinPull(SOLO_BUTTON_PORT,SOLO_BUTTON_PIN,LL_GPIO_PULL_UP);
+
     printf1(TAG_GEN,"hello solo\r\n");
 }
 
@@ -100,8 +106,7 @@ void heartbeat()
 {
     static int state = 0;
     static uint32_t val = (LED_INIT_VALUE >> 8) & 0xff;
-    // int but = IS_BUTTON_PRESSED();
-    int but = 0;
+    int but = IS_BUTTON_PRESSED();
 
     if (state)
     {
@@ -116,12 +121,8 @@ void heartbeat()
     {
         state = !state;
     }
-    // int c = PCD_GET_EP_TX_CNT(USB,1);
-    // int c = PCD_GET_EP_TX_STATUS(USB,1);
-    // printf("tx counter: %x\r\n",PCD_GET_EP_TX_CNT(USB,1));
-
-    //	if (but) RGB(val * 2);
-    //	else
+    if (but) led_rgb(val * 2);
+    else
         led_rgb((val << 16) | (val*2 << 8));
 }
 
@@ -171,6 +172,46 @@ void device_manage()
 
 int ctap_user_presence_test()
 {
+#if SKIP_BUTTON_CHECK
+    return 1;
+#endif
+
+    uint32_t t1 = millis();
+    led_rgb(0xff3520);
+
+#if USE_BUTTON_DELAY
+    delay(3000);
+    led_rgb(0x001040);
+    delay(50);
+    return 1;
+#endif
+while (IS_BUTTON_PRESSED())
+{
+    if (t1 + 5000 < millis())
+    {
+        printf1(TAG_GEN,"Button not pressed\n");
+        return 0;
+    }
+}
+
+t1 = millis();
+
+do
+{
+    if (t1 + 5000 < millis())
+    {
+        return 0;
+    }
+    if (! IS_BUTTON_PRESSED())
+        continue;
+    delay(1);
+}
+while (! IS_BUTTON_PRESSED());
+
+led_rgb(0x001040);
+
+delay(50);
+
 return 1;
 }