refactor user_presence handling

docs: add szszszsz as a contributor

targets/stm32l432/build/common.mk

@@ -6,7 +6,7 @@ AR=$(PREFIX)arm-none-eabi-ar
 DRIVER_LIBS := lib/stm32l4xx_hal_pcd.c lib/stm32l4xx_hal_pcd_ex.c lib/stm32l4xx_ll_gpio.c  \
        lib/stm32l4xx_ll_rcc.c lib/stm32l4xx_ll_rng.c lib/stm32l4xx_ll_tim.c  \
 	   lib/stm32l4xx_ll_usb.c lib/stm32l4xx_ll_utils.c lib/stm32l4xx_ll_pwr.c \
-	   lib/stm32l4xx_ll_usart.c lib/stm32l4xx_ll_spi.c
+	   lib/stm32l4xx_ll_usart.c lib/stm32l4xx_ll_spi.c lib/stm32l4xx_ll_exti.c
 
 USB_LIB := lib/usbd/usbd_cdc.c lib/usbd/usbd_cdc_if.c lib/usbd/usbd_composite.c \
 	   lib/usbd/usbd_conf.c lib/usbd/usbd_core.c lib/usbd/usbd_ioreq.c \

targets/stm32l432/lib/stm32l4xx_ll_exti.c

@@ -0,0 +1,290 @@
+/**
+  ******************************************************************************
+  * @file    stm32l4xx_ll_exti.c
+  * @author  MCD Application Team
+  * @brief   EXTI LL module driver.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+#if defined(USE_FULL_LL_DRIVER)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l4xx_ll_exti.h"
+#ifdef  USE_FULL_ASSERT
+#include "stm32_assert.h"
+#else
+#define assert_param(expr) ((void)0U)
+#endif
+
+/** @addtogroup STM32L4xx_LL_Driver
+  * @{
+  */
+
+#if defined (EXTI)
+
+/** @defgroup EXTI_LL EXTI
+  * @{
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup EXTI_LL_Private_Macros
+  * @{
+  */
+
+#define IS_LL_EXTI_LINE_0_31(__VALUE__)              (((__VALUE__) & ~LL_EXTI_LINE_ALL_0_31) == 0x00000000U)
+#define IS_LL_EXTI_LINE_32_63(__VALUE__)             (((__VALUE__) & ~LL_EXTI_LINE_ALL_32_63) == 0x00000000U)
+
+#define IS_LL_EXTI_MODE(__VALUE__)                   (((__VALUE__) == LL_EXTI_MODE_IT)            \
+                                                   || ((__VALUE__) == LL_EXTI_MODE_EVENT)         \
+                                                   || ((__VALUE__) == LL_EXTI_MODE_IT_EVENT))
+
+
+#define IS_LL_EXTI_TRIGGER(__VALUE__)                (((__VALUE__) == LL_EXTI_TRIGGER_NONE)       \
+                                                   || ((__VALUE__) == LL_EXTI_TRIGGER_RISING)     \
+                                                   || ((__VALUE__) == LL_EXTI_TRIGGER_FALLING)    \
+                                                   || ((__VALUE__) == LL_EXTI_TRIGGER_RISING_FALLING))
+
+/**
+  * @}
+  */
+
+/* Private function prototypes -----------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup EXTI_LL_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup EXTI_LL_EF_Init
+  * @{
+  */
+
+/**
+  * @brief  De-initialize the EXTI registers to their default reset values.
+  * @retval An ErrorStatus enumeration value:
+  *          - 0x00: EXTI registers are de-initialized
+  */
+uint32_t LL_EXTI_DeInit(void)
+{
+  /* Interrupt mask register set to default reset values */
+  LL_EXTI_WriteReg(IMR1,   0xFF820000U);
+  /* Event mask register set to default reset values */
+  LL_EXTI_WriteReg(EMR1,   0x00000000U);
+  /* Rising Trigger selection register set to default reset values */
+  LL_EXTI_WriteReg(RTSR1,  0x00000000U);
+  /* Falling Trigger selection register set to default reset values */
+  LL_EXTI_WriteReg(FTSR1,  0x00000000U);
+  /* Software interrupt event register set to default reset values */
+  LL_EXTI_WriteReg(SWIER1, 0x00000000U);
+  /* Pending register clear */
+  LL_EXTI_WriteReg(PR1,    0x007DFFFFU);
+
+  /* Interrupt mask register 2 set to default reset values */
+#if defined(LL_EXTI_LINE_40)
+  LL_EXTI_WriteReg(IMR2,        0x00000187U);
+#else
+  LL_EXTI_WriteReg(IMR2,        0x00000087U);
+#endif
+  /* Event mask register 2 set to default reset values */
+  LL_EXTI_WriteReg(EMR2,        0x00000000U);
+  /* Rising Trigger selection register 2 set to default reset values */
+  LL_EXTI_WriteReg(RTSR2,       0x00000000U);
+  /* Falling Trigger selection register 2 set to default reset values */
+  LL_EXTI_WriteReg(FTSR2,       0x00000000U);
+  /* Software interrupt event register 2 set to default reset values */
+  LL_EXTI_WriteReg(SWIER2,      0x00000000U);
+  /* Pending register 2 clear */
+  LL_EXTI_WriteReg(PR2,         0x00000078U);
+
+  return 0x00u;
+}
+
+/**
+  * @brief  Initialize the EXTI registers according to the specified parameters in EXTI_InitStruct.
+  * @param  EXTI_InitStruct pointer to a @ref LL_EXTI_InitTypeDef structure.
+  * @retval An ErrorStatus enumeration value:
+  *          - 0x00: EXTI registers are initialized
+  *          - any other calue : wrong configuration
+  */
+uint32_t LL_EXTI_Init(LL_EXTI_InitTypeDef *EXTI_InitStruct)
+{
+  uint32_t status = 0x00u;
+
+  /* Check the parameters */
+  assert_param(IS_LL_EXTI_LINE_0_31(EXTI_InitStruct->Line_0_31));
+  assert_param(IS_LL_EXTI_LINE_32_63(EXTI_InitStruct->Line_32_63));
+  assert_param(IS_FUNCTIONAL_STATE(EXTI_InitStruct->LineCommand));
+  assert_param(IS_LL_EXTI_MODE(EXTI_InitStruct->Mode));
+
+  /* ENABLE LineCommand */
+  if (EXTI_InitStruct->LineCommand != DISABLE)
+  {
+    assert_param(IS_LL_EXTI_TRIGGER(EXTI_InitStruct->Trigger));
+
+    /* Configure EXTI Lines in range from 0 to 31 */
+    if (EXTI_InitStruct->Line_0_31 != LL_EXTI_LINE_NONE)
+    {
+      switch (EXTI_InitStruct->Mode)
+      {
+        case LL_EXTI_MODE_IT:
+          /* First Disable Event on provided Lines */
+          LL_EXTI_DisableEvent_0_31(EXTI_InitStruct->Line_0_31);
+          /* Then Enable IT on provided Lines */
+          LL_EXTI_EnableIT_0_31(EXTI_InitStruct->Line_0_31);
+          break;
+        case LL_EXTI_MODE_EVENT:
+          /* First Disable IT on provided Lines */
+          LL_EXTI_DisableIT_0_31(EXTI_InitStruct->Line_0_31);
+          /* Then Enable Event on provided Lines */
+          LL_EXTI_EnableEvent_0_31(EXTI_InitStruct->Line_0_31);
+          break;
+        case LL_EXTI_MODE_IT_EVENT:
+          /* Directly Enable IT & Event on provided Lines */
+          LL_EXTI_EnableIT_0_31(EXTI_InitStruct->Line_0_31);
+          LL_EXTI_EnableEvent_0_31(EXTI_InitStruct->Line_0_31);
+          break;
+        default:
+          status = 0x01u;
+          break;
+      }
+      if (EXTI_InitStruct->Trigger != LL_EXTI_TRIGGER_NONE)
+      {
+        switch (EXTI_InitStruct->Trigger)
+        {
+          case LL_EXTI_TRIGGER_RISING:
+            /* First Disable Falling Trigger on provided Lines */
+            LL_EXTI_DisableFallingTrig_0_31(EXTI_InitStruct->Line_0_31);
+            /* Then Enable Rising Trigger on provided Lines */
+            LL_EXTI_EnableRisingTrig_0_31(EXTI_InitStruct->Line_0_31);
+            break;
+          case LL_EXTI_TRIGGER_FALLING:
+            /* First Disable Rising Trigger on provided Lines */
+            LL_EXTI_DisableRisingTrig_0_31(EXTI_InitStruct->Line_0_31);
+            /* Then Enable Falling Trigger on provided Lines */
+            LL_EXTI_EnableFallingTrig_0_31(EXTI_InitStruct->Line_0_31);
+            break;
+          case LL_EXTI_TRIGGER_RISING_FALLING:
+            LL_EXTI_EnableRisingTrig_0_31(EXTI_InitStruct->Line_0_31);
+            LL_EXTI_EnableFallingTrig_0_31(EXTI_InitStruct->Line_0_31);
+            break;
+          default:
+            status |= 0x02u;
+            break;
+        }
+      }
+    }
+    /* Configure EXTI Lines in range from 32 to 63 */
+    if (EXTI_InitStruct->Line_32_63 != LL_EXTI_LINE_NONE)
+    {
+      switch (EXTI_InitStruct->Mode)
+      {
+        case LL_EXTI_MODE_IT:
+          /* First Disable Event on provided Lines */
+          LL_EXTI_DisableEvent_32_63(EXTI_InitStruct->Line_32_63);
+          /* Then Enable IT on provided Lines */
+          LL_EXTI_EnableIT_32_63(EXTI_InitStruct->Line_32_63);
+          break;
+        case LL_EXTI_MODE_EVENT:
+          /* First Disable IT on provided Lines */
+          LL_EXTI_DisableIT_32_63(EXTI_InitStruct->Line_32_63);
+          /* Then Enable Event on provided Lines */
+          LL_EXTI_EnableEvent_32_63(EXTI_InitStruct->Line_32_63);
+          break;
+        case LL_EXTI_MODE_IT_EVENT:
+          /* Directly Enable IT & Event on provided Lines */
+          LL_EXTI_EnableIT_32_63(EXTI_InitStruct->Line_32_63);
+          LL_EXTI_EnableEvent_32_63(EXTI_InitStruct->Line_32_63);
+          break;
+        default:
+          status |= 0x04u;
+          break;
+      }
+      if (EXTI_InitStruct->Trigger != LL_EXTI_TRIGGER_NONE)
+      {
+        switch (EXTI_InitStruct->Trigger)
+        {
+          case LL_EXTI_TRIGGER_RISING:
+            /* First Disable Falling Trigger on provided Lines */
+            LL_EXTI_DisableFallingTrig_32_63(EXTI_InitStruct->Line_32_63);
+            /* Then Enable IT on provided Lines */
+            LL_EXTI_EnableRisingTrig_32_63(EXTI_InitStruct->Line_32_63);
+            break;
+          case LL_EXTI_TRIGGER_FALLING:
+            /* First Disable Rising Trigger on provided Lines */
+            LL_EXTI_DisableRisingTrig_32_63(EXTI_InitStruct->Line_32_63);
+            /* Then Enable Falling Trigger on provided Lines */
+            LL_EXTI_EnableFallingTrig_32_63(EXTI_InitStruct->Line_32_63);
+            break;
+          case LL_EXTI_TRIGGER_RISING_FALLING:
+            LL_EXTI_EnableRisingTrig_32_63(EXTI_InitStruct->Line_32_63);
+            LL_EXTI_EnableFallingTrig_32_63(EXTI_InitStruct->Line_32_63);
+            break;
+          default:
+            status = ERROR;
+            break;
+        }
+      }
+    }
+  }
+  /* DISABLE LineCommand */
+  else
+  {
+    /* De-configure EXTI Lines in range from 0 to 31 */
+    LL_EXTI_DisableIT_0_31(EXTI_InitStruct->Line_0_31);
+    LL_EXTI_DisableEvent_0_31(EXTI_InitStruct->Line_0_31);
+    /* De-configure EXTI Lines in range from 32 to 63 */
+    LL_EXTI_DisableIT_32_63(EXTI_InitStruct->Line_32_63);
+    LL_EXTI_DisableEvent_32_63(EXTI_InitStruct->Line_32_63);
+  }
+
+  return status;
+}
+
+/**
+  * @brief  Set each @ref LL_EXTI_InitTypeDef field to default value.
+  * @param  EXTI_InitStruct Pointer to a @ref LL_EXTI_InitTypeDef structure.
+  * @retval None
+  */
+void LL_EXTI_StructInit(LL_EXTI_InitTypeDef *EXTI_InitStruct)
+{
+  EXTI_InitStruct->Line_0_31      = LL_EXTI_LINE_NONE;
+  EXTI_InitStruct->Line_32_63     = LL_EXTI_LINE_NONE;
+  EXTI_InitStruct->LineCommand    = DISABLE;
+  EXTI_InitStruct->Mode           = LL_EXTI_MODE_IT;
+  EXTI_InitStruct->Trigger        = LL_EXTI_TRIGGER_FALLING;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* defined (EXTI) */
+
+/**
+  * @}
+  */
+
+#endif /* USE_FULL_LL_DRIVER */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

targets/stm32l432/src/device.c

@@ -38,6 +38,8 @@ void wait_for_usb_tether();
 
 
 uint32_t __90_ms = 0;
+uint32_t __last_button_press_time = 0;
+uint32_t __last_button_bounce_time = 0;
 uint32_t __device_status = 0;
 uint32_t __last_update = 0;
 extern PCD_HandleTypeDef hpcd;
@@ -75,6 +77,21 @@ void TIM6_DAC_IRQHandler()
             ctaphid_update_status(__device_status);
         }
     }
+
+
+    if (is_touch_button_pressed == IS_BUTTON_PRESSED)
+    {
+        if (IS_BUTTON_PRESSED())
+        {
+            // Only allow 1 press per 25 ms.
+            if ((millis() - __last_button_bounce_time) > 25)
+            {
+                __last_button_press_time = millis();
+            }
+            __last_button_bounce_time = millis();
+        }
+    }
+
 #ifndef IS_BOOTLOADER
 	// NFC sending WTX if needs
 	if (device_is_nfc() == NFC_IS_ACTIVE)
@@ -84,6 +101,21 @@ void TIM6_DAC_IRQHandler()
 #endif
 }
 
+// Interrupt on rising edge of button (button released)
+void EXTI0_IRQHandler(void)
+{
+    EXTI->PR1 = EXTI->PR1;
+    if (is_physical_button_pressed == IS_BUTTON_PRESSED)
+    {
+        // Only allow 1 press per 25 ms.
+        if ((millis() - __last_button_bounce_time) > 25)
+        {
+            __last_button_press_time = millis();
+        }
+        __last_button_bounce_time = millis();
+    }
+}
+
 // Global USB interrupt handler
 void USB_IRQHandler(void)
 {
@@ -493,6 +525,41 @@ static int handle_packets()
     return 0;
 }
 
+static int wait_for_button_activate(uint32_t wait)
+{
+    int ret;
+    uint32_t start = millis();
+    do
+    {
+        if ((start + wait) < millis())
+        {
+            return 0;
+        }
+        delay(1);
+        ret = handle_packets();
+        if (ret)
+            return ret;
+    } while (!IS_BUTTON_PRESSED());
+    return 0;
+}
+static int wait_for_button_release(uint32_t wait)
+{
+    int ret;
+    uint32_t start = millis();
+    do
+    {
+        if ((start + wait) < millis())
+        {
+            return 0;
+        }
+        delay(1);
+        ret = handle_packets();
+        if (ret)
+            return ret;
+    } while (IS_BUTTON_PRESSED());
+    return 0;
+}
+
 int ctap_user_presence_test(uint32_t up_delay)
 {
     int ret;
@@ -500,6 +567,7 @@ int ctap_user_presence_test(uint32_t up_delay)
     {
         return 1;
     }
+
 #if SKIP_BUTTON_CHECK_WITH_DELAY
     int i=500;
     while(i--)
@@ -512,53 +580,41 @@ int ctap_user_presence_test(uint32_t up_delay)
 #elif SKIP_BUTTON_CHECK_FAST
     delay(2);
     ret = handle_packets();
-    if (ret) return ret;
+    if (ret)
+        return ret;
     goto done;
 #endif
-    uint32_t t1 = millis();
+
+    // If button was pressed within last [2] seconds, succeed.
+    if (__last_button_press_time && (millis() - __last_button_press_time < 2000))
+    {
+        goto done;
+    }
+
+    // Set LED status and wait.
     led_rgb(0xff3520);
 
-if (IS_BUTTON_PRESSED == is_touch_button_pressed)
-{
-    // Wait for user to release touch button if it's already pressed
-    while (IS_BUTTON_PRESSED())
-    {
-        if (t1 + up_delay < millis())
-        {
-            printf1(TAG_GEN,"Button not pressed\n");
-            goto fail;
-        }
-        ret = handle_packets();
+    // Block and wait for some time.
+    ret = wait_for_button_activate(up_delay);
     if (ret) return ret;
-    }
-}
-
-t1 = millis();
-
-do
-{
-    if (t1 + up_delay < millis())
-    {
-        goto fail;
-    }
-    delay(1);
-    ret = handle_packets();
+    ret = wait_for_button_release(up_delay);
     if (ret) return ret;
+
+    // If button was pressed within last [2] seconds, succeed.
+    if (__last_button_press_time && (millis() - __last_button_press_time < 2000))
+    {
+        goto done;
     }
-while (! IS_BUTTON_PRESSED());
-
-led_rgb(0x001040);
-
-delay(50);
 
 
-#if SKIP_BUTTON_CHECK_WITH_DELAY || SKIP_BUTTON_CHECK_FAST
+    return 0;
+
+
 done:
-#endif
+    ret = wait_for_button_release(up_delay);
+    __last_button_press_time = 0;
     return 1;
 
-fail:
-return 0;
 }
 
 int ctap_generate_rng(uint8_t * dst, size_t num)

targets/stm32l432/src/init.c

@@ -20,6 +20,7 @@
 #include "stm32l4xx_ll_rng.h"
 #include "stm32l4xx_ll_spi.h"
 #include "stm32l4xx_ll_usb.h"
+#include "stm32l4xx_ll_exti.h"
 #include "stm32l4xx_hal_pcd.h"
 #include "stm32l4xx_hal.h"
 
@@ -849,19 +850,17 @@ void init_gpio(void)
   LL_GPIO_SetPinMode(SOLO_BUTTON_PORT,SOLO_BUTTON_PIN,LL_GPIO_MODE_INPUT);
   LL_GPIO_SetPinPull(SOLO_BUTTON_PORT,SOLO_BUTTON_PIN,LL_GPIO_PULL_UP);
 
-#ifdef SOLO_AMS_IRQ_PORT
-// SAVE POWER
-  // LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_GPIOC);
-  // /**/
-  // LL_GPIO_InitTypeDef GPIO_InitStruct;
-  // GPIO_InitStruct.Pin = SOLO_AMS_IRQ_PIN;
-  // GPIO_InitStruct.Mode = LL_GPIO_MODE_INPUT;
-  // GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
-  // LL_GPIO_Init(SOLO_AMS_IRQ_PORT, &GPIO_InitStruct);
-  //
-  //
-  // LL_GPIO_SetPinMode(SOLO_AMS_IRQ_PORT,SOLO_AMS_IRQ_PIN,LL_GPIO_MODE_INPUT);
-  // LL_GPIO_SetPinPull(SOLO_AMS_IRQ_PORT,SOLO_AMS_IRQ_PIN,LL_GPIO_PULL_UP);
+#ifndef IS_BOOTLOADER
+  LL_SYSCFG_SetEXTISource(LL_SYSCFG_EXTI_PORTA, LL_SYSCFG_EXTI_LINE0);
+  LL_EXTI_InitTypeDef EXTI_InitStruct;
+  EXTI_InitStruct.Line_0_31 = LL_EXTI_LINE_0;   // GPIOA_0
+  EXTI_InitStruct.Line_32_63 = LL_EXTI_LINE_NONE;
+  EXTI_InitStruct.LineCommand = ENABLE;
+  EXTI_InitStruct.Mode = LL_EXTI_MODE_IT;
+  EXTI_InitStruct.Trigger = LL_EXTI_TRIGGER_RISING;
+  LL_EXTI_Init(&EXTI_InitStruct);
+
+  NVIC_EnableIRQ(EXTI0_IRQn);
 #endif
 
 }