// Copyright 2019 SoloKeys Developers
//
// Licensed under the Apache License, Version 2.0, <LICENSE-APACHE or
// http://apache.org/licenses/LICENSE-2.0> or the MIT license <LICENSE-MIT or
// http://opensource.org/licenses/MIT>, at your option. This file may not be
// copied, modified, or distributed except according to those terms.

#ifndef _APP_H_
#define _APP_H_
#include <stdint.h>
#include "version.h"

#define DEBUG_UART      USART1

#ifndef DEBUG_LEVEL
#define DEBUG_LEVEL     0
#endif

#define NON_BLOCK_PRINTING 0

#define BOOT_TO_DFU         0


#define IS_BOOTLOADER       1

#define ENABLE_U2F_EXTENSIONS
// #define ENABLE_U2F

#define DISABLE_CTAPHID_PING
#define DISABLE_CTAPHID_WINK
#define DISABLE_CTAPHID_CBOR

//                              0xRRGGBB
#define LED_INIT_VALUE			0x0a0300
#define LED_MAX_SCALER          40
#define LED_MIN_SCALER          1
// # of ms between each change in LED
#define HEARTBEAT_PERIOD        5
// Each LED channel will be multiplied by a integer between LED_MAX_SCALER
// and LED_MIN_SCALER to cause the slow pulse.  E.g.
// #define LED_INIT_VALUE			0x301000
// #define LED_MAX_SCALER          30
// #define LED_MIN_SCALER          1
// #define HEARTBEAT_PERIOD        8
// Will pulse from 0x301000 to 0x903000 to 0x301000 ...
// Which will take ~8 * (30)*2 ms

// Button
#define SOLO_BUTTON_PORT        GPIOA
#define SOLO_BUTTON_PIN         LL_GPIO_PIN_0

#define SKIP_BUTTON_CHECK_WITH_DELAY        0
#define SKIP_BUTTON_CHECK_FAST              1

#define SOLO_PRODUCT_NAME "Solo Bootloader " SOLO_VERSION

void printing_init();
void hw_init(int lf);

// Trigger software reset
void device_reboot();

int is_authorized_to_boot();
int is_bootloader_disabled();
void bootloader_heartbeat();

// Return 1 if Solo is secure/locked.
int solo_is_locked();



#endif