aaffce4021
"git describe" is used to get the version of the firmware from GIT tags ans it is used for build artifacts' names We would prefer not to have this depency inside Docker
121 lines
3.9 KiB
Makefile
121 lines
3.9 KiB
Makefile
ifndef DEBUG
|
|
DEBUG=0
|
|
endif
|
|
|
|
APPMAKE=build/application.mk VERSION_FULL=${VERSION_FULL}
|
|
BOOTMAKE=build/bootloader.mk VERSION_FULL=${VERSION_FULL}
|
|
|
|
merge_hex=solo mergehex
|
|
|
|
.PHONY: all all-hacker all-locked debugboot-app debugboot-boot boot-sig-checking boot-no-sig build-release-locked build-release build-release build-hacker build-debugboot clean clean2 flash flash_dfu flashboot detach cbor test
|
|
|
|
|
|
# The following are the main targets for reproducible builds.
|
|
# TODO: better explanation
|
|
firmware-hacker:
|
|
$(MAKE) -f $(APPMAKE) -j8 solo.hex PREFIX=$(PREFIX) DEBUG=0 EXTRA_DEFINES='-DSOLO_HACKER -DFLASH_ROP=0'
|
|
|
|
firmware-hacker-debug-1:
|
|
$(MAKE) -f $(APPMAKE) -j8 solo.hex PREFIX=$(PREFIX) DEBUG=1 EXTRA_DEFINES='-DSOLO_HACKER -DFLASH_ROP=0'
|
|
|
|
firmware-hacker-debug-2:
|
|
$(MAKE) -f $(APPMAKE) -j8 solo.hex PREFIX=$(PREFIX) DEBUG=2 EXTRA_DEFINES='-DSOLO_HACKER -DFLASH_ROP=0'
|
|
|
|
firmware-secure-non-solokeys:
|
|
$(MAKE) -f $(APPMAKE) -j8 solo.hex PREFIX=$(PREFIX) DEBUG=0 EXTRA_DEFINES='-DFLASH_ROP=2'
|
|
|
|
firmware-secure:
|
|
$(MAKE) -f $(APPMAKE) -j8 solo.hex PREFIX=$(PREFIX) DEBUG=0 EXTRA_DEFINES='-DUSE_SOLOKEYS_CERT -DFLASH_ROP=2'
|
|
|
|
bootloader-nonverifying:
|
|
$(MAKE) -f $(BOOTMAKE) -j8 bootloader.hex PREFIX=$(PREFIX) EXTRA_DEFINES='-DSOLO_HACKER' DEBUG=0
|
|
|
|
bootloader-verifying:
|
|
$(MAKE) -f $(BOOTMAKE) -j8 bootloader.hex PREFIX=$(PREFIX) DEBUG=0
|
|
|
|
full-clean: clean2
|
|
|
|
|
|
# The older targets, may be re-organised
|
|
all:
|
|
$(MAKE) -f $(APPMAKE) -j8 solo.hex PREFIX=$(PREFIX) DEBUG=$(DEBUG) EXTRA_DEFINES='-DFLASH_ROP=1'
|
|
|
|
all-hacker:
|
|
$(MAKE) -f $(APPMAKE) -j8 solo.hex PREFIX=$(PREFIX) DEBUG=$(DEBUG) EXTRA_DEFINES='-DSOLO_HACKER -DFLASH_ROP=0'
|
|
|
|
all-locked:
|
|
$(MAKE) -f $(APPMAKE) -j8 solo.hex PREFIX=$(PREFIX) EXTRA_DEFINES='-DFLASH_ROP=2'
|
|
|
|
debugboot-app:
|
|
$(MAKE) -f $(APPMAKE) -j8 solo.hex DEBUG=2 PREFIX=$(PREFIX) \
|
|
LDSCRIPT=linker/stm32l4xx_extra.ld EXTRA_DEFINES='-DAPPLICATION_START_PAGE=16 -DSOLO_HACKER'
|
|
|
|
debugboot-boot:
|
|
$(MAKE) -f $(BOOTMAKE) -j8 bootloader.hex PREFIX=$(PREFIX) DEBUG=1 \
|
|
LDSCRIPT=linker/bootloader_stm32l4xx_extra.ld EXTRA_DEFINES='-DAPPLICATION_START_PAGE=16 -DSOLO_HACKER'
|
|
|
|
boot-sig-checking:
|
|
$(MAKE) -f $(BOOTMAKE) -j8 bootloader.hex PREFIX=$(PREFIX) DEBUG=0
|
|
|
|
boot-no-sig:
|
|
$(MAKE) -f $(BOOTMAKE) -j8 bootloader.hex PREFIX=$(PREFIX) EXTRA_DEFINES='-DSOLO_HACKER' DEBUG=0
|
|
|
|
build-release-locked: cbor clean2 boot-sig-checking clean all-locked
|
|
$(VENV) $(merge_hex) solo.hex bootloader.hex all.hex
|
|
|
|
build-release: cbor clean2 boot-sig-checking clean all
|
|
$(VENV) $(merge_hex) solo.hex bootloader.hex all.hex
|
|
|
|
build-hacker: cbor clean2 boot-no-sig clean all-hacker
|
|
$(VENV) $(merge_hex) solo.hex bootloader.hex all.hex
|
|
|
|
build-debugboot: clean2 debugboot-boot clean debugboot-app
|
|
$(VENV) $(merge_hex) solo.hex bootloader.hex all.hex
|
|
|
|
clean:
|
|
$(MAKE) -f $(APPMAKE) clean
|
|
$(MAKE) -f $(BOOTMAKE) clean
|
|
clean2:
|
|
rm -f solo.hex solo.map bootloader.hex bootloader.map all.hex
|
|
$(MAKE) -f $(APPMAKE) clean
|
|
$(MAKE) -f $(BOOTMAKE) clean
|
|
|
|
flash: solo.hex bootloader.hex
|
|
$(VENV) $(merge_hex) solo.hex bootloader.hex all.hex
|
|
STM32_Programmer_CLI -c port=SWD -halt -e all --readunprotect
|
|
STM32_Programmer_CLI -c port=SWD -halt -d all.hex -rst
|
|
|
|
flash_dfu: solo.hex bootloader.hex
|
|
$(VENV) $(merge_hex) solo.hex bootloader.hex all.hex
|
|
# STM32_Programmer_CLI -c port=usb1 -halt -e all --readunprotect
|
|
STM32_Programmer_CLI -c port=usb1 -halt -rdu -d all.hex
|
|
|
|
flashboot: bootloader.hex
|
|
STM32_Programmer_CLI -c port=SWD -halt -e all --readunprotect
|
|
STM32_Programmer_CLI -c port=SWD -halt -d bootloader.hex -rst
|
|
|
|
flash-firmware:
|
|
$(SZ) -A solo.elf
|
|
solo program aux enter-bootloader
|
|
solo program bootloader solo.hex
|
|
|
|
# tell ST DFU to enter application
|
|
detach:
|
|
STM32_Programmer_CLI -c port=usb1 -ob nBOOT0=1
|
|
|
|
bootloader.hex:
|
|
echo "You need to build the bootloader first."
|
|
|
|
solo.hex:
|
|
echo "You need to build the application first."
|
|
|
|
cbor:
|
|
$(MAKE) -f $(APPMAKE) -j8 cbor
|
|
|
|
test:
|
|
$(MAKE) build-release-locked
|
|
$(MAKE) build-release
|
|
$(MAKE) build-hacker
|
|
$(MAKE) build-debugboot
|
|
$(MAKE) clean2
|